Sunday, July 11, 2021

137. Andrew H.S. Mazzaschi, Shino-glazed yunomi, altered shape

137. Andrew H.S. Mazzaschi,  Shino-glazed  yunomi, altered shape

 

 
 
 
 

For Mazzaschi, see item 103.

Brown clay, Shino-glaze with added decorations in birdmatte white, plum, and jade; foot ring left unglazed. Weight: 302 g (11 oz). Rim diameter: 8.2 cm (3-1/4 in); maximum diameter: 9 cm (3-1/2 in); foot ring diameter: 4.9 cm (1-7/8 in). Height: 9.3 cm (3-5/8 in).

This sits on the base of the foot ring. The foot ring is about 0.6 cm (1/4 in) high on the exterior; the interior was hollowed out to about this distance. The artist’s mark, the letters “AHSM” inside a square was impressed faintly into the center of the base. The exterior of the foot ring has been carved inward toward the top to form a convex arc. Above the foot ring the walls of the pot rise in a continuous convex arc to the rim. The maximum diameter lies 5.4 cm (2-1/8 in) above the base. After throwing, the walls of the pots were cut into shallow diagonal grooves from just below the rim down to almost the bottom of the walls, where they begin to curve inward sharply toward the foot ring. The shape of the pot was then altered to form seven vertical sections of varying widths. The pot is smooth except at a few places along the rim and the edges of the ribs between the vertical sections.

This was glazed in Shino. The edges of the vertical grooves were outlined in plum. There is a U-shaped irregular band of jade green extending across half of the exterior wall and an irregular band of birdmatte white just under the rim on the exterior. The red “scorch marks” characteristic of Shino glaze are visible on the interior of the piece.

Purchased from the artist, July 2021.

Saturday, July 10, 2021

136. Evan Hestekin, Shino-glazed, wood-fired faceted bowl

136. Evan Hestekin, Shino-glazed, wood-fired faceted bowl






For Hestekin, see item 134.

Brown clay, Shino glaze with significant carbon capture, base of foot ring left unglazed. Weight: 652 g (1.4 lb). Rim and maximum width: 16.3 cm (6-1/2 in); foot ring diameter: 8.3 cm (3-1/4 in). Height: 7.6 cm (3 in).

This sits on the base of the foot ring. The foot ring is about 1 cm (3/8 in) high on the exterior; the interior has been hollowed out to about 2/3s of that distance. The walls rise outward in a straight line at a shallow angle to about 1.2 cm (1/2 in) above the base; the width of the pot is about 12 cm (4-3/4 in) at this point. The walls then angle outward in more or less a straight line to the rim. The walls of the pot were divided into nine facets of varying widths. There are slight outward bumps at the top and bottom corners of each facet. Five horizontal ridges extending across the width of a facet were created by pressing down or up with the edge of a spatula-like tool. The surface of the pot is smooth except along the rim and the edges of the horizontal ridges.

With the exception of the base of the foot ring, this was coated in a Shino glaze and wood-fired to cone 10. There was significant carbon capture, resulting in colors ranging from a bluish gray to a dark gray. There is also a significant amount of crackling in the glaze. The glaze pulled away from the rim and the edges of the horizontal ridges, allowing the brown clay to show through.

Purchased from the artist, July 2021.

135. Evan Hestekin, wood-fired yunomi

135. Evan Hestekin, wood-fired yunomi, with dark brown decoration


 

For Hestekin, see item 134.

Gray clay, bluish-gray glaze, exterior decorated with dark brown glaze; base of foot ring left unglazed. Weight: 188 g (7 oz). Rim diameter: 7.3-7.6 cm (2-7/8–3.0 in); maximum diameter 7.6 cm (3 in); foot ring diameter: 5 cm (2 in). Height: 7.6 cm (3 in).

This sits on the base of the foot ring. The foot ring is 0.6 cm (1/4 in) high; the interior is hollowed out to about half this distance. Above the foot ring, the walls angle outward at about a 45-degree angle to a height of 1.3 cm (1/2 in). The artist’s marks, “EH” inside a square and a slightly larger square with three lines inside it, were pressed into this portion of the side walls. The maximum diameter occurs at this point.  Above this, the walls rise to the rim, angling slightly inward in most places. Roughly halfway up the cup, a groove was formed to serve as a grasping point for the cup. Here and there the walls show throw marks. The surface of this is smooth.

This was wood-fired to cone 10. The interior and exterior, with the exception of the base of the foot ring, are a bluish-gray color. Extending from the interior lip of the rim and angling down and across the exterior are three irregular splotches of dark brown glaze.  The edges of these splotches tend to be darker, almost black.

Purchased from the artist, July 2021.

134. Evan Hestekin, wood-fired yunomi, with altered shape

134. Evan Hestekin, wood-fired yunomi, with altered shape

 


Hestekin lives in Cornucopia, Wisconsin, a hamlet bordering Lake Superior near Duluth. He mixes his own glazes. For more on him and other examples of his work, see his Instagram account @hestekinpottery. 

Gray clay, ash-glaze on the interior; the exterior was left unglazed. Weight: 186 g (7 oz). Width: 6.4–7.6 cm (2-1/2 – 3 in); foot ring diameter: 4.7 cm (1-7/8 in). Height: 7.6 cm (3 in).

This sits on the base of the foot ring. The foot ring is about 1 cm (3/8 in) tall; the interior was hollowed out slightly less than this distance. Above the foot ring, the walls angle outward at about a 45-degree angle to a height of 1.3 cm (1/2 in). The artist’s marks, “EH” inside a square and a slightly larger square with three lines inside it, were pressed into this portion of the side walls. Above this, the walls were pushed inward on one side, creating an irregular shape. The external walls show strong throw marks. Beginning at the bottom, a shallow groove extends around the circumference of the walls, spiraling upward in a continuous movement. The exterior surface is rough.

The interior of this has an ash glaze; it is gray in color with many brown speckles where the clay shows through. The exterior was left unglazed; the colors from the wood-firing range from the gray of the clay through dark reddish-brown. The area of the exterior walls around the vertical dent is speckled with yellow spots. This same area had enough ash melt to create a sheen. This was fired to cone 10.

Purchased from the artist, July 2021.

Friday, July 9, 2021

133. Jake Brodsky, wood- and soda-fired vase, with altered shape

133. Jake Brodsky,  wood- and soda-fired vase, with altered shape







For Brodsky, see item 116.

Light gray clay incorporating wild clay gathered on Madeline Island in Lake Superior, interior has a lining glaze; exterior colors from wood-firing. Weight: 462 g (1 lb). Rim diameter: 2.5 cm (1 in); maximum diameter: 10.2 cm (4 in); base diameter: 8.8 cm (3-1/2 in). Height: 12 cm (4-3/4 in).

This sits on the outer edges of the base; the interior of the base is slightly concave. The remnants of the five posts used to separate pots during firing are visible on the bottom. The walls rise in a convex arc from the base to the neck. The maximum diameter lies about 5 cm (2 in) above the vase. The base of the neck is 10.2 cm (4 in) above the base. The lower edge of the neck is 3.0 cm (1-1/8 in) in diameter; the neck flares out to a diameter of 3.2 cm (1-1/4 in) before sloping inward to the rim. The walls of the pot have horizontal striations around the circumference. They appear to have been made with a metal comb-like tool. There are five irregularly spaced, vertical grooves cut into the sides of the pot extending from the neck to the base; these create indentations in the sides of the pot. The artist’s mark, an asterisk shape inside a circle, was pressed into the exterior wall just above the base on one side. The surface is textured and rough.

The interior of the vase has a clear glaze. The colors on the exterior result from the wood-firing and range from red through black. One side of the vase has very little coloring. The soda-firing added a sheen to the exterior walls, more so on one side than the other.

A great combination of shape, modeling, and firing.

Purchased from the artist, July 2012.

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...