Showing posts with label yunomi. Show all posts
Showing posts with label yunomi. Show all posts

Sunday, July 2, 2023

220. TAKAHASHI Rakusai, Shigaraki yunomi (teacup)

220. TAKAHASHI Rakusai IV 高橋楽斎, 1925- , Shigaraki yunomi 信楽湯のみ (Shigaraki-ware teacup)










The Takahashi family has been a major producer of Shigaraki-wares since the early nineteenth century. Tozaemon, the founder of the lineage, was active from the 1820s and founded the Rakusai kiln around 1835. The third-generation Rakusai (1898-1976) was an important figure in the post-WWII preservation of traditional wood-fired unglazed potting in Shigaraki and a holder of a Shiga prefectural Living National Treasure title. The seller attributes this to Takahashi Rakusai IV. The fourth-generation holder of the title was named Mitsuo at birth, ascended to the Rakusai title in 1976 on the death of his predecessor, and held it until 2010, when he surrendered it to his son, the current and fifth-generation Rakusai. He was still an active potter at the age of 97 in 2022. The leaflet enclosed in the box is devoted to Takahashi Rakusai III.  From the pictures of pots and boxes available online, the piece and the calligraphy and the seal stamped on the box resemble those of Takahashi Rakusai IV. The box in which this came does not appear to be over fifty years old. Rakusai IV is probably the correct attribution.

Light tan clay, wood-fired with kiln effects in the pinkish brown range, fly ash deposits, and vitrified natural ash glazing, with one bidoro tear. The base and the interior of the foot ring largely escaped the kiln effects, showing the natural color of the baked clay..Weight: 164 g (5.8 oz). Height: 7.6 cm (3 in). Width (at the widest point at the rim): 7.9 cm (3-1/8 in). 

This sits on the flat foot ring, which is 4.4 cm (1-3/4 in) in diameter and roughly 0.8 cm (5/16 in) high on the exterior wall of the foot; the base of the foot ring is 0.3 cm (1/8 in) wide; and the area within the ring foot was hollowed out to roughly two-thirds of the depth of the foot. The interior is level and flat. The foot ring appears to have been trimmed on a wheel—the dimensions are very even. Above the foot, the walls move outward and upward in a straight line at about a 45-degree angle to a height of 1.3 cm (1/2 in). The artist’s seal, a small oval cartouche with characters inside (too tiny to read) was pressed into this area of the piece. The walls proper extend upward and outward at a steep angle in roughly a straight line. The exterior walls and the interior base of the cup show circular finger marks. A groove encircles the exterior, rising slowly up the cup in a continuous line as it moves around the exterior, to just below the rim. The surface of the piece is rough, like fine-grain sandpaper. 

This was unglazed. On the front of the cup near the rim and extending downward about a third of the height of the cup is an area of vitrified natural ash glaze, dark greenish brown in color; at the right end of this area, a tear of molten glass (bidoro) formed and slid downward. The front of the cup and the area of the interior opposite the front are covered with the blackened remnants of some fly ash deposits. The back and the interior of the cup were largely unaffected by ash and are a pinkish brown color. Where the cup was exposed to more heat and flames, the color tends toward a darker, reddish brown. 

This came with a box. The lid is inscribed in three lines:  信楽 (Shigaraki), 湯のみ (yunomi), and 楽斎 (Rakusai), with the artist’s seal stamped in red on the lower left. A potted biography of Takahashi Rakusai III was enclosed with the piece.

A nice example of how a skilled hand and a knowledgeable kiln operator can enhance an ordinary, everyday object. 

Purchased from Treasures of Old Times, Bangkok, Thailand, June 2023 (invoice).

 

Tuesday, January 31, 2023

201. HAMADA Junri, 1948-2022, black Oribe yunomi

201. HAMADA Junri  浜田純理, 1948-2022, black Oribe yunomi

 







For Hamada, see item 200. 

If the following description sounds the same as that in the preceding entry, it’s because both pots follow the same design. The yunomi is simply larger.

Reddish- brown clay. Glazed in white and black, with dark red colors showing through on the unglazed spots. Weight: 242 g (8.6 oz). Height: 7.9 cm (3-1/8 in). Diameter of rim: 7.3 cm (2-7/8 in); of foot ring, 5.6 cm (2-3/16 in); maximum: 9.5 cm (2-3/4 in); minimum: 6.6 cm (2-5/8 in). Capacity: 180 ml (6.5 fl oz).

This sits on the roughly circular foot ring. The foot ring is 0.6 cm (1/4 in) high on the outside. The inside has been hollowed; the hollow is deepest just inside the ring, with a gentle mound toward the ccnter. Above the foot ring, the walls move outward and upward at a shallow obtuse angle (110 degrees) in a straight line to a height of 1.3 cm (1/2 in) to reach the maximum width of the cup. Above this they move inward in a shallow convex arc to the minimum width 5.7 cm (2-1/4 in) above the base. Above this waist the walls continue upward in another shallow convex arc to the rim.  The exterior is ringed by shallow horizontal grooves and has many dents and bumps. The surface is fairly smooth. The interior walls do not mirror the exterior shape. They are fairly vertical, and there is a shallow bowl at the bottom. The interior walls are very smooth.

Wood-fired, using white and black Oribe glazes, with a fine luster all over from the ash glazing.

Purchased from Art on the Table, a company in Seattle specializing in Japanese products, in November 2022.

 

Monday, July 12, 2021

138. Jeff Abney, yunomi, with Hamada rust glaze

138. Jeff Abney, yunomi, with Hamada rust glaze






Jeff Abney is a potter in Blairsville, Georgia; his studio is called Red Gate Pottery. For other examples of his work, see his Instagram account, @jeffabneypottery.

Gray clay, glazed in Hamada rust glaze, with black accents; foot ring and base left unglazed. Weight: 484 g (1.1 lb). Rim and maximum diameter: 10.4 cm (4-1/8 in); foot ring diameter: 6.3 cm (2-1/2 in). Height: 10.2 cm (4 in).

This sits on the base of the foot ring. The foot ring is about 0.6 cm (1/4 in) high on the exterior. The interior has been hollowed out to about a third of this height. Above the foot ring, the walls slant outward at about a 60-degree angle to a height of 2.4 cm (7/8 in) above the base. At this point, the cup is about 8.4 cm (3-1/4 in) in diameter. The artist’s mark, an image of a torii gate inside a circle, was impressed into this section of the cup. From this, the walls curve in a shallow convex arc to the rim. Just beneath the rim, the walls are concave to supply a place to hold the cup. The rim is rolled. The surface is slightly gritty.

The interior and all of the exterior except the base and the ring foot were covered with the Hamada rust glaze. There are several black lines across the exterior surface.

A bit larger and heavier than most yunomi, but visually a very satisfying piece.

Purchased from the artist, July 2021.

Sunday, July 11, 2021

137. Andrew H.S. Mazzaschi, Shino-glazed yunomi, altered shape

137. Andrew H.S. Mazzaschi,  Shino-glazed  yunomi, altered shape

 

 
 
 
 

For Mazzaschi, see item 103.

Brown clay, Shino-glaze with added decorations in birdmatte white, plum, and jade; foot ring left unglazed. Weight: 302 g (11 oz). Rim diameter: 8.2 cm (3-1/4 in); maximum diameter: 9 cm (3-1/2 in); foot ring diameter: 4.9 cm (1-7/8 in). Height: 9.3 cm (3-5/8 in).

This sits on the base of the foot ring. The foot ring is about 0.6 cm (1/4 in) high on the exterior; the interior was hollowed out to about this distance. The artist’s mark, the letters “AHSM” inside a square was impressed faintly into the center of the base. The exterior of the foot ring has been carved inward toward the top to form a convex arc. Above the foot ring the walls of the pot rise in a continuous convex arc to the rim. The maximum diameter lies 5.4 cm (2-1/8 in) above the base. After throwing, the walls of the pots were cut into shallow diagonal grooves from just below the rim down to almost the bottom of the walls, where they begin to curve inward sharply toward the foot ring. The shape of the pot was then altered to form seven vertical sections of varying widths. The pot is smooth except at a few places along the rim and the edges of the ribs between the vertical sections.

This was glazed in Shino. The edges of the vertical grooves were outlined in plum. There is a U-shaped irregular band of jade green extending across half of the exterior wall and an irregular band of birdmatte white just under the rim on the exterior. The red “scorch marks” characteristic of Shino glaze are visible on the interior of the piece.

Purchased from the artist, July 2021.

Saturday, July 10, 2021

135. Evan Hestekin, wood-fired yunomi

135. Evan Hestekin, wood-fired yunomi, with dark brown decoration


 

For Hestekin, see item 134.

Gray clay, bluish-gray glaze, exterior decorated with dark brown glaze; base of foot ring left unglazed. Weight: 188 g (7 oz). Rim diameter: 7.3-7.6 cm (2-7/8–3.0 in); maximum diameter 7.6 cm (3 in); foot ring diameter: 5 cm (2 in). Height: 7.6 cm (3 in).

This sits on the base of the foot ring. The foot ring is 0.6 cm (1/4 in) high; the interior is hollowed out to about half this distance. Above the foot ring, the walls angle outward at about a 45-degree angle to a height of 1.3 cm (1/2 in). The artist’s marks, “EH” inside a square and a slightly larger square with three lines inside it, were pressed into this portion of the side walls. The maximum diameter occurs at this point.  Above this, the walls rise to the rim, angling slightly inward in most places. Roughly halfway up the cup, a groove was formed to serve as a grasping point for the cup. Here and there the walls show throw marks. The surface of this is smooth.

This was wood-fired to cone 10. The interior and exterior, with the exception of the base of the foot ring, are a bluish-gray color. Extending from the interior lip of the rim and angling down and across the exterior are three irregular splotches of dark brown glaze.  The edges of these splotches tend to be darker, almost black.

Purchased from the artist, July 2021.

134. Evan Hestekin, wood-fired yunomi, with altered shape

134. Evan Hestekin, wood-fired yunomi, with altered shape

 


Hestekin lives in Cornucopia, Wisconsin, a hamlet bordering Lake Superior near Duluth. He mixes his own glazes. For more on him and other examples of his work, see his Instagram account @hestekinpottery. 

Gray clay, ash-glaze on the interior; the exterior was left unglazed. Weight: 186 g (7 oz). Width: 6.4–7.6 cm (2-1/2 – 3 in); foot ring diameter: 4.7 cm (1-7/8 in). Height: 7.6 cm (3 in).

This sits on the base of the foot ring. The foot ring is about 1 cm (3/8 in) tall; the interior was hollowed out slightly less than this distance. Above the foot ring, the walls angle outward at about a 45-degree angle to a height of 1.3 cm (1/2 in). The artist’s marks, “EH” inside a square and a slightly larger square with three lines inside it, were pressed into this portion of the side walls. Above this, the walls were pushed inward on one side, creating an irregular shape. The external walls show strong throw marks. Beginning at the bottom, a shallow groove extends around the circumference of the walls, spiraling upward in a continuous movement. The exterior surface is rough.

The interior of this has an ash glaze; it is gray in color with many brown speckles where the clay shows through. The exterior was left unglazed; the colors from the wood-firing range from the gray of the clay through dark reddish-brown. The area of the exterior walls around the vertical dent is speckled with yellow spots. This same area had enough ash melt to create a sheen. This was fired to cone 10.

Purchased from the artist, July 2021.

Wednesday, July 7, 2021

126. Anne Maraviglia, Shino-glazed wood-fired yunomi

126. Anne Maraviglia, Shino-glazed wood-fired yunomi

 


Maraviglia is based in Gardner, Illinois. She studied in Japan. Her studio name, Flying Plum Tree, was given her by her Japanese teacher, and the seal script characters for this form her artist’s mark. For more on her and other examples of her work, see her Instagram account @FlyingPlumTree.

Light tan clay, Shino glaze with significant carbon capture; foot ring and base left unglazed. Weight: 198 g (8 oz). Rim diameter: 7.8 cm (3-1/8 in); maximum diameter: 8.3 cm (3-1/4 in), foot ring diameter: 4.2 cm (1-5/8 in). Height: 7 cm (2-3/4 in).

This sits on the base of the foot ring. The exterior of the foot ring is 0.8 cm (5/16 in) high; the interior of the base has been hollowed out to slightly less than this distance. The artist’s mark was impressed into the base. The walls rise in a continuous arc to the rim, reaching the maximum diameter about halfway up. There is a slight indention running around the circumference at about the halfway mark to provide a fingerhold. The finish on this is smooth.

This was glazed inside and out with Shino, with the exception of the foot ring and the base. The interior of the pot is cream colored with some red blush. The exterior shows more of the red color and has significant carbon capture, particularly along the rim, which is almost a solid black. What would be the white portions of the Shino glaze on the exterior are a greenish-gray color.

A nice example of wood-firing with this glaze, resulting in a dynamic range of colors.

Purchased from the artist July 2012.


Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...