Showing posts with label Ralph Nuara. Show all posts
Showing posts with label Ralph Nuara. Show all posts

Saturday, January 28, 2023

198. Ralph Nuara, slipware mug

198. Ralph Nuara, slipware mug







For Nuara, see item 175.

Red clay. Slipware glazes in white and black; with clear luster glaze; base and exterior of foot ring left unglazed. Weight: 388 g (14 oz). Height: 8.3 cm (3-1/4 in). Width of rim: 10.2 x 9 cm (4 x 3-1/2 in). Diameter of base: 8 cm (3-1/8 in). Width with handle: 12.3 cm (4-7/8 in). Capacity: 396 ml (14 fl oz).

This sits on a very narrow foot ring 0.3 cm (1/8 in) wide; the interior of the ring foot has been hollowed out evenly to a depth of 0.4 cm (3/16 in). The walls above the foot ring extend upward at about a 45 degree angle to a height of 0.6 cm (1/4 in) above the base; the artist’s mark has been impressed into the clay on this strip. Above this the walls of the cup rise to the rim in a series of horizontal undulations. The cross-sections are highly irregular in shape. The walls on the side opposite the handle were flattened after throwing, and there is a large irregular dent in the middle of this side. The handle is attached at the top just below the rim and about 2 cm (3/4 in) above the base at the bottom.  The surface is very smooth.

The bottom of the inside of the mug and the irregular dent in the flat side of the walls were glazed in white. A horizontal band of black was drawn in the middle of the exterior walls apparently before the handle was attached. On the exterior, there are also splashes of black in a vertical strip near the flattened area and at the top of the handle. On the interior, there are two irregular horizontal bands of black along with vertical splashes of black along the interior walls and drips of black on the white surface of the bottom. The entire cup was covered with a clear luster glaze, with the exception of the foot ring and the slanted portion of the walls just above the foot. There are also three spots on the walls that are not covered with the luster glaze; there are apparently the spots where the mug was held by the artist’s fingertips as he dipped the mug in the glaze. Glaze was also applied over the artist’s mark.

Despite the irregularities in the shape of the rim, this is easy to drink from. It’s well-balanced and fits well in the hand.

Purchased from the artist in September 2022. 

Friday, March 18, 2022

176. Ralph Nuara, medium-size bowl with resist decoration

176. Ralph Nuara, medium-size bowl with resist decoration








For Nuara, see item 175. 

Light tan clay. Glazed in black, tan, and red. Weight: 404 g (14.5 oz). Diameter of rim: 14.2 cm (5-5/8 in); of foot ring: 5.7 cm (2-1/4 in). Height: 8 cm (3-1/8 in).

This sits on the inner edge of the foot ring. The outer edge of the ring has been carved off, leaving it beveled inward. The foot ring is about 0.7 cm (1/4 in) high inside and out. The lower part of the body proper is narrower than it is in most bowls. Above the foot ring, the walls are a concave arc in shape to the height of 1.7 cm (5/8 in). The walls then rise outward in a convex arc to just below the rim. There is a break at this point and the walls flare outward to the rim in a straight line. The lip of the rim in rounded. The interior of the body mirrors that of the exterior. The surface of this is quite smooth.

The black rectangular areas on the body were formed using strips of blue masking tape. An undercoating of black was applied first; the torn strips of tape were then distributed over the body. The bowl was then covered in a thin tan glaze, which allowed the black undercoat to show through in many places outside the tape strips. The interior of the ring foot was also covered with the black and tan glazes. One side of the bowl was then dipped in a thin red glaze. During the firing the tape burned away, exposing the black undercoat.

Another example of ingenuity from this potter (see the previous item). 

Purchased from Nuara in January 2022.

Thursday, March 17, 2022

175. Ralph Nuara, chopstick rests

175. Ralph Nuara, chopstick rests

 


Nuara is a potter in Minneapolis. For other examples of his work, see his Instagram account @ralphnuara.

Red clay. Slip decorated in white and black with clear glaze; base left unglazed. Weight: 20 g (3/4 oz). Dimensions: 4.5 x 3.2 x 1.3 cm (1-3/4 x 1-1/4 x 1/2 in).

The pair began as a strip of clay used to secure a partially dried pot to a wheel for shaping and trimming. The strip was then decorated, dried, snapped in half, and then fired. There is a groove down the middle to serve as the chopstick resting place.

Slip-decorated in white and black. The top side was then coated with a clear glaze. The bottom was left unglazed.

Ingenious reuse of materials.

Purchased from Nuara in January 2022.

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...