Showing posts with label Richard Gilson. Show all posts
Showing posts with label Richard Gilson. Show all posts

Friday, May 21, 2021

87. Richard Gilson, built-up vase

87. Richard Gilson, built-up vase

 


 


 


 


 


 


For Gilson, see item 85. 

Dark brown clay, black, light and dark blue glazes; base left unglazed. Weight: 1080 g (2.4 lb). Rim and maximum diameter: 10.7–11.4 cm (4-1/4 – 4-1/2 in); base diameter: 8.2 cm (3-1/4 in). Height: 16.5 cm (7.5 in).

This is a built-up piece. The base is a small bowl, with a flat base. “Gilson” was incised into the base. From the base the walls of the bowl rise outward in an arc to a height of 5 cm (2 in) and a diameter of around 10.7 cm (4-1/4 in). The walls of the pot began as a flat, irregularly shaped sheet of clay, which was then wrapped around the upper part of the bowl and joined together by laying one end over the opposite side where they met. The outer surface of this sheet was decorated with shallowly incised. overlapping spirals in various sizes. The walls have a definite tilt.

The exterior of the bowl was covered with a black glaze. The interior of the pot and the exterior walls were covered in a light blue glaze. The bottom part of the interior has a darker blue glaze. This glaze pooled in the crevices and pulled away from the edges, partially exposing the clay beneath and showing as brown in the finished piece. The surface of the walls inside and out is smooth and shiny; a luster may have been applied to these areas.

This pot has form, decoration, spontaneity, freshness, serendipity. Every angle brings new surprises.

Purchased at the annual winter sale at Feet of Clay Pottery, Brookline, Massachusetts, December 2019.

86. Richard Gilson, small bowl

86. Richard Gilson, small bowl

 


 

 

For Gilson, see item 85.

Off-white clay, white glaze; base of foot ring left unglazed. Weight: 306 g (11 oz). Rim and maximum diameter: 13.7 cm (5-3/8 in); foot ring diameter: 6.3 cm (2-1/2 in). Height: 6 cm (2-3/8 in).

The foot ring is about an eighth of an inch on the exterior. The area within the ring was hollowed out to a similar depth. “Gilson” was incised into the base; it is faintly visible under the glaze. Above the foot the walls rise outward in a shallow convex arc to just beneath the rim where they flare out slightly.

Except for the base of the foot ring, the interior and exterior of the piece were glazed in white.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, April 2019.

 

85. Richard Gilson, miniature lidded container

85. Richard Gilson, miniature lidded container





Gilson teaches pottery at several places in Boston, including Feet of Clay Pottery, where he is one of the managers. His primary practice is producing functional pottery, but he periodically engages in creating sculptural work through both throwing on the wheel and hand-building. He is inspired by nature and organic forms with a focus on coral reefs and the organisms they support.  For more on him and other examples of his work, see his page at www.feetofclaypottery.com.

Black clay, brown and clear glazes; base of foot ring, underside of lid, and gallery on which lid sits left unglazed. Weight: 206 g (7.5 oz). Bottom section. Rim diameter: 6.7 cm (2-5/8 in); maximum diameter: 7 cm (2-3/4 in); foot ring diameter: 5 cm (2 in). Lid. Diameter: 5.3 cm (2-1/8 in). Height: overall, 7.7 cm (3 in); bottom section. 5 cm (2 in); lid, 2.3 cm (1-1/8 in).

This sits on the base of the foot ring, which is 0.6 cm (1/4 in) high on the exterior. The area within the ring foot was hollowed out to half this distance. “Gilson” was incised into the base (it is covered with a glaze and is only faintly visible). Above the foot, the walls rise in a convex arc to the neck, 4.8 cm (1-7/8 in) above the base and 6 cm (2-3/8 in) in diameter. The maximum diameter lies 3.2 cm (1-1/4 in) above the base. At the neck, the walls angle out in a straight line to the rim. Within the mouth of the bottom section, a circular gallery serves as the resting spot for the lid. It is recessed below the rim by about an eighth of an inch. The underside of the lid is flat. The outside perimeter of the underside was removed to a depth of less than a sixteenth of an inch to form the part of the lid that rests on the gallery in the bottom section, leaving the center portion of the underside to protrude a bit. The upper side of the lid is a shallow concave arc from the perimeter to the center post supporting the knob. The top of the knob is pyramidal and rises to a central point. The lid fits nicely on the base.

The base of the foot ring, the underside of the lid, and the galery that supports the lid were left unglazed. The rim and the neck of the bottom section and the outer edge of the lid are a dark brown. The interior and the exterior walls and the center of the foot ring are a grayish-green, with touches of dark brown. The underlying black clay shows through at points and the surface is speckled with dark dots. The surface has a smooth sheen; a luster glaze may have been applied.

The variety of colors on this small pot make it interesting.

Purchased at the annual winter sale at Feet of Clay Pottery, December 2018.

 




Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...