Showing posts with label resist glazing. Show all posts
Showing posts with label resist glazing. Show all posts

Friday, March 18, 2022

176. Ralph Nuara, medium-size bowl with resist decoration

176. Ralph Nuara, medium-size bowl with resist decoration








For Nuara, see item 175. 

Light tan clay. Glazed in black, tan, and red. Weight: 404 g (14.5 oz). Diameter of rim: 14.2 cm (5-5/8 in); of foot ring: 5.7 cm (2-1/4 in). Height: 8 cm (3-1/8 in).

This sits on the inner edge of the foot ring. The outer edge of the ring has been carved off, leaving it beveled inward. The foot ring is about 0.7 cm (1/4 in) high inside and out. The lower part of the body proper is narrower than it is in most bowls. Above the foot ring, the walls are a concave arc in shape to the height of 1.7 cm (5/8 in). The walls then rise outward in a convex arc to just below the rim. There is a break at this point and the walls flare outward to the rim in a straight line. The lip of the rim in rounded. The interior of the body mirrors that of the exterior. The surface of this is quite smooth.

The black rectangular areas on the body were formed using strips of blue masking tape. An undercoating of black was applied first; the torn strips of tape were then distributed over the body. The bowl was then covered in a thin tan glaze, which allowed the black undercoat to show through in many places outside the tape strips. The interior of the ring foot was also covered with the black and tan glazes. One side of the bowl was then dipped in a thin red glaze. During the firing the tape burned away, exposing the black undercoat.

Another example of ingenuity from this potter (see the previous item). 

Purchased from Nuara in January 2022.

Saturday, May 8, 2021

32. Miniature Chinese teabowl with resist design

 32. Miniature Chinese teabowl with resist design

 




Dark grayish-brown clay, black and gold glazes; base left unglazed. Weight: 48 g (1.7 oz). Rim diameter (also maximum diameter): 6.6 cm (2-9/16 in); foot ring diameter: 2.8 cm (1-3/16 in). Height: 2.8 cm (1-3/16 in).

This has the classic teabowl design and was produced in Shandong province in China. The person who gave this to me explained that the interior of the piece was first covered in a gold glaze. A small maple leaf was place in the center of the interior. The black glaze was applied over this. When the piece was fired, the leaf vaporized. After cooling, the area of the black glaze over the leaf was easily removed.

Unfortunately it’s not visible in the picture, but the stem and the tiny veins of the leaf are clear and distinct, as is a small tear in the leaf. The technique of creating such designs through resist techniques utilizing leaves has a long history in China and is found particularly in Jizhou ware.

Gift, received in 2008.

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...