Showing posts with label Joseph Bounds. Show all posts
Showing posts with label Joseph Bounds. Show all posts

Wednesday, March 23, 2022

177. Joseph Bounds, chawan, with Shino glaze, 2022

177. Joseph Bounds, chawan, with Shino glaze, 2022






For Bounds, see item 149. 

Dark clay, Shino glaze. Weight: 344 g (12 oz). Width of rim: 11.5 cm (4-1/2 in); of base: 7.7 cm (3 in). Height: 7 cm (2-3/4 in).

This was shaped by the kurinuki technique this potter favors, with additional modeling by hand. This sits directly on the flat base. The base is roughly circular. The walls are highly irregular, but generally rise in a straight line slanting outward to the rim. The walls appear to have been both carved and molded by the fingers. For the most part the rim is circular, but one side has an inward dent and a pointed and turned over protrusion into the interior, almost like a pouring spout going the wrong way. This pot sits very well in my left hand; the grooves provide easy resting points for my thumb and fingers. It is much more difficult to hold in my right hand. I wonder if Bounds held it in his left hand as he was shaping it. The surface of this is quite smooth to the touch despite the many bumps.

The entire surface was glazed in Shino. During the firing, the glaze cracked and crawled, creating a much crackled surface and exposing the dark clay beneath. There are only a few dabs of the red this glaze can show.

This is very heavy for its size. As with many chawan produced by American potters, it would be difficult to use this in a tea ceremony. It is, however, well-modeled and glazed. Another interesting pot from this young potter.

Purchased from Bounds in February 2022 soon after it was made.

 

Monday, October 25, 2021

151. Joseph Bounds, volcano vase

151. Joseph Bounds, volcano vase







For Bounds, see item 149.

Black clay, unglazed. Base: 9.5 x 6.3 cm (3-3/4 x 2-1/2 in). Height: 11.3 cm (4-1/2 in).

This sits directly on the base, which is a highly irregular oval in shape. The bottom is mostly flat; a few small bumps and dents do not prevent the piece from having a solid footing. The base is roughly 0.6 cm (1/4 in) high, but the top surface is pitted and jagged. The vertical part varies in width from 6.3 cm (2-1/2 in) at the bottom to 2.5 cm (1 in) at the top. The surface of this section is rough and unfinished; there are two vertical panels where the surface has been smoothed with a grooved blade. A hole about 9.2 cm (3-7/8 in) deep was bored from the center of the top down almost to the base.

The surface of this has a slight sheen.

A solid, inventive, deceptively crude piece that reflects light in unusual ways, a pleasure to hold and examine. Bounds also made a similar piece with white clay, but it doesn’t work as well.

Purchased from the artist in October 2021.

 


Sunday, September 12, 2021

150. Joseph Bounds, guinomi

150. Joseph Bounds,  guinomi

 

 
 
 

For Bounds, see item 149.

Light tan clay. Dark blue, tan, and white glazes; base left unglazed. Weight: 124 g (4.5 oz). Rim and maximum diameter: 5.4–5.7 cm (2-1/8–2-1/4 in). foot ring diameter: 3.2–3.6 cm (1-1/4–1-3/8 in). Height: 5.4 cm (2-1/8 in).

This appears to be a pinch pot. It sits on the base of the foot ring, which is a rough oval, about 0.3 cm (1/8 in) high on the outside wall and about half that distance on the inside. Above the foot ring, the walls slant outward at about a 45-degree angle to a height of 1.3 cm (1/2 in) and then continue upward in more or less a straight line to the rim. The exterior walls are very bumpy and gouged. The interior is quite smooth.

It appears that, with the exception of the foot ring and base, the cup was coated with a yellowish-brown slip or glaze; then a white (ash?) glaze was brushed over the exterior. A dark blue glaze was then applied to the interior and a narrow band at the top of the exterior and allowed to run down the exterior on one side.

Purchased from the artist in September 2021.

149. Joseph Bounds, lidded stoneware box

149. Joseph Bounds, lidded stoneware box

 

 
 
 
 
 
 
 

Bounds is a young potter in Faison, North Carolina. For other examples of his work, see his Instagram account, @jgbounds.

Brown clay, yellowish-brown, white, and clear glazes. Weight: 336 g (12 oz).  Bottom section; dimensions at top: 6.3 x 7.2 cm (2-1/2 x 2-7/8 in); dimensions of base: 5.7 x 6.5 cm (2-1/4 x 2-5/8 in); size of opening: 4.4 x 5.3 cm (1-3/4 x 2-1/8 in) by 2.5 cm (1 in) deep. Height: 3.2-3.4 cm (1-1/4–1-5/16 in). Top section: dimensions at bottom and top: 6.3 x 7.2 cm (2-1/2 x 2-7/8 in); dimensions of opening: 4.3 x 5.7 cm (1-7/8 x 2-5/16 in) by 2.5 cm (1 in) deep. Height: 3.8 cm (1-1/2 in). Height (overall): 7 cm (2-3/4 in).

This was shaped “upside down” as a hollowed-out shape with straight sides and a domed top. It was then set open side down upon a rolled slab; the slab was trimmed to fit the bottom and then attached to the body. The slab is about 0.6 cm (1/4 in) thick. “BOUNDS” was incised into the bottom of the base. The seam is not visible to the eye but can be felt by the fingertips. The shape of the body is roughly rectangular. The sides have been smoothed down, but vertical grooves were cut into the long sides at two points. The top is rough and unfinished. The box was cut at a slight diagonal to form the lid and base. A narrow flange was built around the opening on the base section, roughly 0.3 cm (1/8 in) high; a slightly taller groove was hollowed out along the inside margins of the lid section to accommodate the flange. The lid fits securely on the base. The texture of the base section is sandy; the top of the lid is quite bumpy.

The interiors of both sections appear to have been coated with a clear glaze. The exterior was coated with a brown slip and a white (ash?) glaze was splashed over the top and dripped down the sides.

Purchased from the artist in September 2021.

 

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...