Showing posts with label Red Alder Studios. Show all posts
Showing posts with label Red Alder Studios. Show all posts

Friday, July 9, 2021

131. Alder Gustafson, wood-fired extruded lidded jar

131. Alder Gustafson, wood-fired extruded lidded jar

 


 


For Gustafson and the production process, see item 128.

Dark gray clay, interior has a lining glaze; exterior colors from wood-firing. Weight: 158 g (5-1/2 oz). Roughly 4.2 cm (1-5/8 in) square. Height: 7 cm (2-3/4 in).

This sits on four small rectangular feet a scant quarter of a centimeter (eighth of an inch) high. On the base inside the four feet is inscribed “al ru.” The bottom of the column rests on a square slab a little bit larger than the column. The walls of the column are irregular and slant to one side. On each side of the column, Gustafson gouged three vertical grooves from top to bottom. The top was closed off by another slab of clay. The column was cut across at an angle to create a lid. The height to the lid ranges from 5.0 to 5.7 cm (2.0 - 2-1/4 in) above the base. On two opposite sides of the interior of the lid are flanges that extend downward for about 0.4 cm (3/16 in), forming a secure fit between the lid and the base section. The surface of the exterior is rather rough.

The interior of this has a dark reddish-brown lining glaze. The exterior colors come from the wood firing and range from red to black. Particularly along the lower edges of the exterior, ash melt has given the walls a glaze-like sheen.

Purchased from the artist, July 2021.

130. Alder Gustafson, wood-fired extruded vase

130. Alder Gustafson, wood-fired extruded vase



For Gustafson and the production process, see item 128.

Dark gray clay, coated with an iron-rich slip and wood-fired. Weight: 158 g (5-1/2 oz). Roughly 4.2 cm (1-5/8 in) square. Height: 9.5 cm (3-3/4 in).

This sits directly on the base. The artist’s mark, “al ru” is incised into the base. After extruding, the column was arched backwards to form a curved column. The top and bottom were closed off, and a small whole was drilled in the upper right-hand corner of one side to create the mouth for the vase. The surface of this has a few short, shallow vertical ridges, but is otherwise smooth.

This was coated with an iron-rich slip and then wood-fired. The colors range from a dark brownish red through a dark brown. Visible on two sides are the marks left by the tips of the artist’s fingers as he dipped the pot into the slip.

Purchased from the artist, July 2021.

 


129. Alder Gustafson, salt-fired extruded vase

129. Alder Gustafson, salt-fired extruded vase

 

 


For Gustafson and the production process, see item 128.

Dark gray clay, coated with an iron-rich slip and then salt-fired. Weight: 176 g (6 oz). Roughly 4.2 cm (1-5/8 in) square. Height: 8.7 cm (3-1/2 in).

This sits on four small rectangular feet a scant quarter of a centimeter (eighth of an inch) high. On the base inside the four feet is inscribed “al ru.” After extruding, the top and bottom of the column were closed off with squarish slabs of clay. The slab on the bottom is slightly larger than the column. The walls of the column are irregular and slant to one side. The walls are roughly 7.5 cm (3 in) high. A small, squarish column was affixed to one quadrant of the top to serve as the mouth of the vase. The surface of this is relatively smooth.

This was coated in an iron-rich slip and then salt-fired, giving the surface a slight sheen. Visible on two sides are the marks left by the tips of the artist’s fingers as he dipped the pot into the slip.

Purchased from the artist, July 2021.


Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...