Showing posts with label Andrew H.S. Mazzaschi. Show all posts
Showing posts with label Andrew H.S. Mazzaschi. Show all posts

Thursday, March 24, 2022

178. Andrew Mazzaschi, eight wall hangings, 2022

178. Andrew Mazzaschi, eight wall hangings, 2022


For Mazzaschi, see item 126.

These are all irregularly shaped small pieces. The front of each is roughly convex, with the grooved and glazed surfaces this potter favors. Many of them have bumps. The backs are concave. A rectangular bar was attached to the back side of each, with two holes for attaching a hanging wire. The artist’s stamp, a square box with his initials, AHSM, was impressed into the back of each.

There is no set arrangement for displaying these pieces. The one pictured is just what I happened to hit upon. They could be displayed singly or in groups. Each piece could be hung in the opposite direction. The possibilities for display are limitless, which is part of the attraction.

Purchased from Mazzaschi in February 2022.



A. Red clay. Glazed in white, with the red clay showing through at the stress points. Weight: 76 g (2.7 oz). Dimensions: 10.7 x 6.3 x 2.3 cm (4-1/4 x 2-1/2 x 7/8 in).



B. Black clay. Glazed in a dark Tenmoku, with white and gold highlights. Weight: 70 g (2.5 oz). Dimensions: 8.3 x 6.7 x 1.7 cm (3-1/4 x 2-5/8 x 5/8 in).



C. Red clay. Glazed in a dark Tenmoku with white highlights. Weight: 70 g (2.5 oz). 10.2 x 7.6 x 2 cm (4 x 3 x 3/4 in).

 



D. Red clay. Glazed in a dark Tenmoku with white and blue highlights. Weight: 68 g (2.5 oz). Dimensions: 8.8 x 6.3 x 1.6 cm (3-1/2 x 2-1/2 x 1/2 in).


[Cont. in next entry}

 

178. Andrew Mazzaschi, eight wall hangings, cont.

178. Andrew Mazzaschi, eight wall hangings, cont. (see previous entry).



E. Red clay. Glazed in a dark Tenmoku with white highlights. Weight: 76 g (2.7 oz). Dimensions: 9.7 x 6.6 x 2 cm (3-7/8 x 2.5/8 x 3/4 in).




F. Red clay. Glazed in white, with the red clay showing through, with blue and gold highlights. Weight: 72 g (2.6 oz). Dimensions: 9.7 x 6.8 x 2.5 cm (3-7/8 x 2-3/4 x 1 in).




G. Red clay. Glazed in white, with the red clay showing through, with blue highlights. Weight: 78 g (2.7 oz). Dimensions: 11.7  x 7.6 x 2.3 cm (4-5/8 x 3 x 7/8 in).

 




H. Black clay. Glazed in a dark Tenmoku with white and blue highlights. Weight: 86 g (3 oz). Dimensions: 10.2 x 6.8 x 2.3 cm (4 x 2-3/4 x 7/8 in).

 

Friday, March 11, 2022

167. Andrew Mazzaschi, mug

 167. Andrew Mazzaschi, mug







For Mazzaschi, see item 103.

Dark chocolate clay, white glaze, base left unglazed. Weight: 345 g (12 oz). Width of rim: 9.2 cm (3-1/2 in); of base: 6.3 cm (2-1/4 in). Maximum width of body: 9.4 cm (3-5/8 in). Width with handle: 11.7 cm (4-5/8 in). Minimum width: 7.7 cm (3 in). Capacity: 500 ml (2 cups).

This sits directly on the flat base. The artist’s mark, a square with his initials AHSM, was stamped into the base. Above the base, the walls rise outward at a 45-degree angle to reach the maximum width 2.5 cm (1 in) above the base. From there the walls curve inward and then outward to the rim in a concave arc. The minimum width lies 7 cm (2-3/4 in) above the base. This section of the walls was divided into six panels by vertical diagonal ridges sloping from top to bottom and left to right. The handle was attached just below the rim and just above the break at the maximum width.

The base and a small portion of the walls just above the base were left unglazed. The white glaze pulled away from the stress points allowing the color of the clay to show through and forming brown specks and streaks.

This is a comfortable cup to hold. Chipped on rim.

Purchased at Feet of Clay, semiannual pottery sale, December 2021.

 

Thursday, March 10, 2022

166. Andrew Mazzaschi, mug

 166. Andrew Mazzaschi, mug 







For Mazzaschi, see item 103.

Dark chocolate brown clay, glazed with brown slip underglaze and a white overglaze; base and bottom of outside wall left unglazed. Weight: 420 g (15 oz). Diameter of rim: 8.2 cm (3-1/4 in); of base 4.8 cm (1-7/8 in); of bottom bulge: 8.8 cm (3-1/2 in). Width with handle: 11.7 cm (4-5/8 in). Height: 10.3 cm (4-1/8 in). The capacity is 450 ml (1-3/4 cup).

This sits on the flat base. The artist’s mark, a square with his initials AHSM inside, was pressed into the base. The walls bulge out to the widest width of the body 3 cm (1-3/8 in) above the base and then curve inward to the waist 6.4 cm (2-1/2 in) above the base; the waist is 7 cm (2-3/4 in) in diameter. From the waist, the walls slope outward to the rim. The exterior of the body was shaped into eight vertical panels running the length of the body. Diagonal grooves running left to right and from top to bottom were carved into the exterior of the body. The ear-shaped handle was attached just below the rim and just below the widest point of the bottom bulge. The interior mirrors the general shape of the body, but without the panels and grooves. The surface of the glazed portion of the mug is smooth but broken by the ridges at the sides of the panels and grooves.

This was first coated with a brown slip and then with a white glaze. The white glaze pooled in the grooves but pulled away from the stress points at the rim and along the edges of the grooves. At one point there is a blue strip running the length of two of the grooves. The brown slip shows through more on the interior, which has band of whitish glaze at the top with a few drips running down into the mug.

This is one of Mazzaschi’s standard patterns--not the best shape in my opinion. The mug is a bit bottom heavy when full. The weight of the liquid pulls it away from the handle. Also, the final couple of tablespoons of liquid pool in the bulge at the bottom and can rush out when the mug is tilted back to get the last bits.

Purchased at Feet of Clay annual winter sale in December 2021.

 

Sunday, July 11, 2021

137. Andrew H.S. Mazzaschi, Shino-glazed yunomi, altered shape

137. Andrew H.S. Mazzaschi,  Shino-glazed  yunomi, altered shape

 

 
 
 
 

For Mazzaschi, see item 103.

Brown clay, Shino-glaze with added decorations in birdmatte white, plum, and jade; foot ring left unglazed. Weight: 302 g (11 oz). Rim diameter: 8.2 cm (3-1/4 in); maximum diameter: 9 cm (3-1/2 in); foot ring diameter: 4.9 cm (1-7/8 in). Height: 9.3 cm (3-5/8 in).

This sits on the base of the foot ring. The foot ring is about 0.6 cm (1/4 in) high on the exterior; the interior was hollowed out to about this distance. The artist’s mark, the letters “AHSM” inside a square was impressed faintly into the center of the base. The exterior of the foot ring has been carved inward toward the top to form a convex arc. Above the foot ring the walls of the pot rise in a continuous convex arc to the rim. The maximum diameter lies 5.4 cm (2-1/8 in) above the base. After throwing, the walls of the pots were cut into shallow diagonal grooves from just below the rim down to almost the bottom of the walls, where they begin to curve inward sharply toward the foot ring. The shape of the pot was then altered to form seven vertical sections of varying widths. The pot is smooth except at a few places along the rim and the edges of the ribs between the vertical sections.

This was glazed in Shino. The edges of the vertical grooves were outlined in plum. There is a U-shaped irregular band of jade green extending across half of the exterior wall and an irregular band of birdmatte white just under the rim on the exterior. The red “scorch marks” characteristic of Shino glaze are visible on the interior of the piece.

Purchased from the artist, July 2021.

Tuesday, May 25, 2021

107. Andrew H.S. Mazzaschi, lidded jar

107. Andrew H.S. Mazzaschi, lidded jar

 
 
 

For Mazzaschi, see item 103.

Reddish-brown clay, blue and white glazes; base and those portions of the lid and the gallery on which the lid rests were left unglazed. Weight: 540 g (1.2 lb). Bottom section. Rim diameter: 6.7 cm (2-5/8 in); maximum diameter: 8.8 cm (3-1/2 in); base diameter: 6.8 cm (2-3/4 in). Height: 12.5 cm (5 in).  Lid. Rim diameter: 5.3 cm (2-1/8 in). Height: 3.3 cm (1-3/8 in).  Overall height of jar: 16 cm (6-3/8 in).

This sits directly on the base. The artist’s mark, his initials, AHSM, inside a square, was stamped inside this area. Above the base, the walls move in a continuous convex arc to the break at the shoulders, 9.3 cm (3-3/4 in) from the base. The maximum diameter of 8.8 cm (3-1/2 in) lies 5.3 cm (2-1/8 in) above the base; The diameter at the shoulders is 8.2 cm (3-1/4 in). From the shoulders the walls angle upward and inward in more or less a straight line to the neck, which has a diameter of 4.3 cm (1-3/4 in) and lies 11 cm (4-3/8 in) above the base. From the neck the walls angle outward and upward in a straight line to the rim. A downward slanting gallery was created inside the rim to serve as a rest for the lid. The underside of the lid is concave. The upper side rises in a convex arc to the central post, which supports a cone-shaped knob. The lid fits snuggly into the bottom section.

The body of the pot between the base and the shoulders was shaped into an octagon with outward bulging sides and decorated with patterns of slanting grooves to form nested diamond shapes. The artist gives this explanation of the process: the jar “was thrown on the wheel as a cylinder, faceted with a wiggle wire, then stretched from the inside. Then the neck and gallery were thrown and the little lid was thrown separately and the knob carved out of excess clay attached to the lid.”

The inside of the pot and the underside of the lid were glazed in cream. A thin blue glaze was applied to the outside; the glaze pooled in crevices and pulled away from edges, accentuating the facets in the diamond pattern. The color of the clay shows through in many places, giving the surface a mottled appearance. The base and the areas of the lid and the gallery inside the rim were left unglazed.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, May 2021.

 

106. Andrew H.S. Mazzaschi, albarello-shaped jar

106. Andrew H.S. Mazzaschi, albarello-shaped jar

 

 

 

 



 

 

For Mazzaschi, see item 103.

White stoneware clay, pale green/dark red glaze; base left unglazed. Weight: 680 g (1.5 lb). Rim diameter: 5.6 cm (2-3/16 in); maximum diameter: 9.3 cm (3-5/8 in); foot ring diameter: 5.4 cm (2-1/8 in). Height: 15.7 cm (6-1/4 in).

The shape was inspired by the albarello. Albarelli date from the fifteenth century and were traditionally made of majolica. They were used by apothecaries for dry-goods storage and had a parchment or leather lid.

This sits on the base of the foot ring. Both on the inside and the outside, the foot is about 0,6 cm (1/4 in) high. The artist’s mark, his initials, AHSM, inside a square, was stamped inside this area. Above the foot ring, the walls quickly rise in a convex arc to the maximum diameter of 9.3 cm (3-5/8 in) at the first break 3.5 cm (1-3/8 in) above the base. From there the walls move in a concave arc to the next break at the shoulders, 11 cm (4-7/8 in) above the base. The diameter at the shoulders is 8.8 cm (3-1/2 in). Within this concave area, the narrowest diameter is 8.2 cm (3-1/4 in); it lies 7.8 cm (3-1/8 in) from the base, roughly at the midpoint of the pot. From the shoulders the walls slant inward at a straight angle to the neck, 13.8 cm (5-1/2 in) above the base. The diameter at the bottom the neck is 6 cm (2-3/8 in). The walls of the neck slant slightly inward in a straight line as they rise to the rim. The finish on the pot is smooth.

This was glazed in a copper-containing glaze that is pale green where thinly applied but self-reduces where thick, turning a dark scarlet. The interior of the pot is white. The foot was left unglazed.

The pot has a nice heft, and the concave arc in the middle makes it easy to hold, perhaps a consideration in the designing of a small jar that would be handled frequently and possibly stored on a high shelf. If several albarelli were stored side by side, the concavity would give room for fingers to slide between the jars to pick one up; straight abutting sides would make it more difficult to pull one jar out. If so, the shape represents a nice adaptation of form to function.

An intriguing shape, with its combination of convex and concave arcs and straight lines, made even more eye-catching by the random pattern of green and red colors.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, May 2021.

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...