Showing posts with label Jeff Abney. Show all posts
Showing posts with label Jeff Abney. Show all posts

Friday, January 27, 2023

197. Jeff Abney, mug

197. Jeff Abney (Red Gate Pottery Studio), mug “with tractor-tire texture”

 








For Abney, see item 138.

Stoneware, coarse gray clay. “Hamada” glaze showing dark red with black streaks; bottom unglazed. Weight 490 g (17.5 oz). Height: 9.2 cm (3-5/8 in). Diameter at mouth: 9.7 cm (3-7/8 in); Width with handle: 13.2 cm (5-1/4 in). Capacity: 428 ml (15 fl oz).

This sits on the flat base, which has been scored with concentric circles. The walls slope outward from the base, reaching the widest diameter 9.2 cm (3.5/8 in) about 2.5 cm (1 in) above the base and then move gradually inward to the narrowest diameter 8.8 cm (3-1/2 in) about 2 cm (3/4 in) below the rim. The walls then flare outward at a slight angle to the rim. The walls would be very irregular in cross-sections. The artist’s marks (2) have been impressed into the walls just above the base. Two horizontal rows of chevrons (the “tractor-tire texture") were impressed into the walls just above the widest diameter and at the narrowest diameter. They appear to have been made with a roller device. The top of the handle is attached over the top row of chevrons; the bottom is even with the base.  The texture is smooth except over the chevrons.

This was glazed in what Abney calls the Hamada glaze, a dark reddish brown glaze with black streaks from the wood-firing reminiscent of those used by Hamada Shōji. The base and a narrow portion of the walls just above the base were left unglazed.

The mug is heavy but easy to hold.  Simple yet effective decoration.

Purchased from the artist in September 2022.

 

Tuesday, July 13, 2021

140. Jeff Abney, moon jar, with lid, ash-glazed

140. Jeff Abney, moon jar, with lid, ash-glazed


For Abney, see item 138.

Gray clay, ash-glazed on the exterior, clear glaze on the interior, base and underside of lid left unglazed. Weight: 965 g (2.2 lb). Height (overall): 13 cm (5-1/8 in). Bottom section. Rim diameter: 5.3 cm (2-1/8 in); mouth diameter: 4.5 cm (1-3/4 in); maximum diameter: 12.5 cm (5 in); base diameter: 9 cm (3-1/2 in). Height: 12.3 cm (4-7/8 in).  Lid. Diameter: 8.2 cm (3-1/4 in); diameter of flange: 4.3 cm (1-11/16 in). Height: 1.7 cm (5/8 in).

This sits on the base, which has a very shallow concavity. The walls rise in a continuous convex arc to the neck. The artist’s marks—a torii gate inside a circle and “JA” inside a circle—were impressed into the exterior wall just above the base. The walls exhibit throw marks in the form of shallow horizontal lines around the circumference. The rim is slightly rolled. The lid has a shape like a mushroom with a flatish cap. The underside, a shallow concave arc, is mirrored in a convex arc on the top; the center of the top has been flattened. The flange is about 0.6 cm (1/4 in) high. It is only slightly smaller than the mouth, and the lid fits snuggly onto the base. The surface of this is coarse and pitted.

The interior has a clear glaze. The exterior, with the exceptions of the base and the underside of the lid, was covered with an ash glaze, resulting in colors ranging from cream through yellow through brown dispersed randomly.

Nicely shaped. The randomness of the coloration is very pleasing.

Purchased from the artist, July 2021.

 

139. Jeff Abney, raku-fired vase, with wax-resist decoration

139. Jeff Abney, raku-fired vase, with wax-resist decoration

 
 
 
 

For Abney, see item 138.

Gray clay, cream glaze, with wax-resist decoration; base left unglazed. Weight: 812 g (1.8 lb). Rim diameter: 6 cm (2-3/8 in); maximum diameter: 13 cm (5-1/4 in); base diameter: 8.5 cm (3-3/8 in). Height: 12 cm (4-3/4 in).

This sits on the base. The walls rise in a shallow convex arc to the shoulders, which are 9.5 cm (3-3/4 in) above the base. The shoulders are also the site of the maximum width. Above the shoulders, the walls angle inward at about 45 degrees to the base of the neck, which lies 11.3 cm (4-1/2 in) above the base. The neck angles inward steeply to the rim. The artist’s marks—a torii gate inside a circle and “JA” inside a circle—were impressed into the exterior wall just above the base. This has a variety of textures—smooth over the glazed areas, coarse and dusty-feeling in the unglazed areas.

The interior and the exterior, with the exception of the base, were covered in a cream glaze. The two, dark swooshes on the exterior were formed using a wax-resist technique. The pot was raku-fired in the American style. It was removed from the kiln while still hot and then covered with sawdust and a large metal can. The fumes from the sawdust penetrated the edges of the crackles, outlining them. The glaze over the areas covered by wax fell off, and these areas were similarly colored by the smoldering sawdust.

The glazing and firing techniques left this looking like a victim of mistreatment and rough use over many years. The result is a dramatic piece. It’s not in any sense “pretty,” but it does draw and hold the eye.

Purchased from the artist, July 2021.

 

Monday, July 12, 2021

138. Jeff Abney, yunomi, with Hamada rust glaze

138. Jeff Abney, yunomi, with Hamada rust glaze






Jeff Abney is a potter in Blairsville, Georgia; his studio is called Red Gate Pottery. For other examples of his work, see his Instagram account, @jeffabneypottery.

Gray clay, glazed in Hamada rust glaze, with black accents; foot ring and base left unglazed. Weight: 484 g (1.1 lb). Rim and maximum diameter: 10.4 cm (4-1/8 in); foot ring diameter: 6.3 cm (2-1/2 in). Height: 10.2 cm (4 in).

This sits on the base of the foot ring. The foot ring is about 0.6 cm (1/4 in) high on the exterior. The interior has been hollowed out to about a third of this height. Above the foot ring, the walls slant outward at about a 60-degree angle to a height of 2.4 cm (7/8 in) above the base. At this point, the cup is about 8.4 cm (3-1/4 in) in diameter. The artist’s mark, an image of a torii gate inside a circle, was impressed into this section of the cup. From this, the walls curve in a shallow convex arc to the rim. Just beneath the rim, the walls are concave to supply a place to hold the cup. The rim is rolled. The surface is slightly gritty.

The interior and all of the exterior except the base and the ring foot were covered with the Hamada rust glaze. There are several black lines across the exterior surface.

A bit larger and heavier than most yunomi, but visually a very satisfying piece.

Purchased from the artist, July 2021.

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...