Showing posts with label Jennifer Wyman. Show all posts
Showing posts with label Jennifer Wyman. Show all posts

Sunday, May 16, 2021

61. Jennifer Wyman, small vase

61. Jennifer Wyman, small vase




For Wyman, see item 54.

Tan clay, blue-green glaze; base left unglazed. Weight: 222 g (8 oz). Rim diameter: 4.5 x 4 cm (1-3/4 x 1-1/2 in); maximum diameter: 8.2 cm (3-1/4 in); base diameter: 5 cm (2 in). Height: 8.2 cm (3-1/4 in).

This sits directly on the flat base. The artist’s initials, “JSW,” are incised into the base. The walls of the pot expand outward and upward from the base with two bulging horizontal bands, to the maximum diameter, which is 5 cm (2 in) above the base. Above this the walls slope inward in more or less a straight line, before rising to the rim. The body of the pot begins as a rough circle at the base but becomes more and more oval-shaped as the walls rise. The slope at the top has a pattern of variously spaced angular short gashes in the clay. The rim of the pot is uneven and slopes to one side. The finish of the pot is rough in places.

The reddish-brown slip is visible at the bottom and shows through the glaze at various points where it was scratched with a pointed tool in a spiraling line around the pot. The blue-green glaze was applied to both the interior and the exterior of the pot, with the exception of the base.

Purchased at the annual winter sale at Feet of Clay Pottery in Brookline, Massachusetts, in December 2019.

60. Jennifer Wyman, miniature lidded container

60. Jennifer Wyman, miniature lidded container






For Wyman, see item 54.

Dark brown clay, russet glaze; the base was left unglazed as were those portions of the underside of the lid and the gallery in the bottom section that touch. Weight: 248 g (9 oz). Bottom section. Rim diameter: 6 cm (2-3/8 in); maximum diameter: 7.5 cm (3 in); base diameter: 4.4 cm (1-3/4 in). Lid. Diameter: 5 cm (2 in). Height: overall, 7.5 cm (3 in); bottom section, 5.7 cm (2-1/4 in); lid, 2.5 cm (1 in).

This sits directly on the flat base, which is an irregular circle. Three small, protective felt pads were affixed to the base. The walls rise in a steep arc outward to the maximum diameter, which is 4 cm (1-1/2 in) above the base. They then curve inward to the rim. The gallery on which the lid sits is recessed about a quarter inch below the rim. The underside of the rim is concave; The upper side is convex. The handle was formed from a roll of clay. About a third of the way in from each end, a deep line was incised into the clay around the circumference, dividing the handle into three parts. The ends of the roll were then pressed into the lid. The lid sits loosely in place.

Both the exterior and the interior were glazed in a russet color. The base, the outer rim of the underside of the lid, and the gallery on which the lid sits were left unglazed.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, in May 2019.

 



59. Jennifer Wyman, miniature lidded container

59. Jennifer Wyman, miniature lidded container

 




For Wyman, see item 54.

Light gray clay, gray and blue glazes; base, rim of lid, and gallery on which lid rests unglazed. Weight: 158 g (5.6 oz). Bottom section. Rim (and maximum) diameter: 8.3 cm (3-5/16 in); base diameter: 2.5 cm (1 in). Lid. Diameter: 7.5 cm (3 in). Height: overall, 4.4 cm (1-3/4 in); bottom section, 3.2 cm (1-1/4 in); lid, 1.6 cm (5/8 in).

This sits directly on the flat base, which is an irregular six-sided polygon. The artist’s initials, “JSW,” were incised into the base. The walls of the bottom section rise in an even arc to the rim. The exterior walls have been flattened in irregular shapes in three rings around the circumference. The interior of this section has a gallery, about 0.3 cm (1/8 in) below the rim, on which the lid sits. The underside of the lid is concave. The upper side rises inward and upward from the rim in a shallow arc to a central knob. The lid has also been flattened in irregular shapes. The knob is an irregular, seven-side polygon. Its top is flat. The lid sits securely on the bottom section.

The ground is a gray glaze. Small splashes of blue glaze were applied randomly to the exterior surfaces of both parts. The underside of the lid and the interior of the bottom section have the gray glaze, with only one spot of blue in the interior. The glazes pulled away from the lines outlining the flattened bevels, leaving these lines much lighter in color and, in effect, emphasizing these shapes. The base of the bottom section, the outer edges of the underside of the lid, and the gallery on which the lid sits were left unglazed.

Purchased at the annual winter sale at Feet of Clay Pottery, Brookline, Massachusetts, December 2018.

 

Saturday, May 15, 2021

58. Jennifer Wyman, miniature lidded container

58. Jennifer Wyman, miniature lidded container





For Wyman, see item 54.

Light gray clay, blue glaze; base of foot ring and the edges of lid and the gallery in the bottom part left unglazed. Weight: 140 g (5 oz). Bottom part. Rim diameter: 3.7 cm (1-1/2 in); maximum diameter: 6.7 cm (2-5/8 in); foot ring diameter: 3.2 cm (1-1/4 in). Lid. Diameter: 3.5 cm (1-3/8 in). Height: overall, 7.2 cm (2-7/8 in); bottom part: 5.3 cm (2-1/8 in); lid: 1.7 cm (5/8 in).

The foot ring is 0.6 cm (1/4 in) high on the exterior. The interior has been hollowed out in a concave shape. The artist’s initials, “JSW,” are incised into the clay of the base. The walls of the pot rise upward and outward in an arc to the maximum diameter, which is 2.7 cm (1-1/8 in) above the base, and then curve inward to the rim. From just above the maximum diameter to the foot ring, the walls of the pots are scored in a series of seven, irregularly spaced concentric ridges running around the circumference. Above this area, the walls of the pot are smooth. The gallery is recessed about 0.15 cm (1/16 in) below the rim. The underside of the lid is concave. The upper side rises in an arc to meet the center post. The center knob curves slightly outward from its base to the top. The top itself has been hollowed out in a concave shape. A circular ridge was scored on the upper side of the lid. The lid sits very securely in place.

The lower half of the bottom part was covered with a gray slip, as was the interior of the foot ring. The upper part of bottom section was covered with a blue-green glaze down to the area of the maximum diameter. The interior of this section was also glazed. The underside of the lid is covered in a gray slip. The upper side is glazed. The base of the foot ring, the gallery on which the lid sits, and the outer edges of the underside of the lid were left unglazed.

There are symmetries in the modeling and decoration—the interiors of the top knob, the underside of the lid, and the foot ring are all concave, and the interior of the foot ring and the interior of the underside of the lid are both covered in a gray slip. None of these details is obvious when the lid is in place. The upper parts of both the bottom section and the lid are glazed. Wyman thinks about the unseen.

 Purchased at the annual winter sale at Feet of Clay Pottery, Brookline, Massachusetts, December 2018.

57. Jennifer Wyman, pair of small vases

57. Jennifer Wyman, pair of small vases

 



For Wyman, see item 54.

A (smaller vase). Dark brown clay, cream, black, and brown colors; base of foot ring left unglazed. Weight: 220 g (8 oz). Rim width: 6.2 cm (2.5 in); maximum diameter: 7.3 cm (2-7/8 in); foot ring diameter: 4.2 cm (1-5/8 in). Height: 9.2 cm (3-5/8 in).

On the outside the foot ring is about 0.6 cm (1/4 in) high. The inside of the foot ring has been hollowed out to a depth of a sixteenth of an inch. The artist’s initials, JSW, were incised into the base. From the foot ring the walls curve outward and upward in a smooth arc to the maximum diameter 3.2 cm (1-1/4 in) above the base. They then curve inward to the neck, which is about 8 cm (3-1/8 in) above the base. From the neck the walls rise more or less in a straight line to the rim.  The rim has been shaped into a rough square with bowed sides. This reshaping affects only the rim; below that the pot is circular.

B (larger vase). Dark brown clay, cream, black, and brown colors; base of foot ring left unglazed. Weight: 280 g (10 oz). Rim width: 6.7 cm (2-5/8 in); maximum diameter: 7.7 cm (3 in); foot ring diameter: 4.5 cm (1-3/4 in). Height: 11.4 cm (4-1/2 in).

On the outside the foot ring is about 1 cm (3/8 in) high. The inside of the ring has been hollowed out to a depth of a sixteenth of an inch. The artist’s initials, JSW, were incised into the base. From the foot ring the walls curve outward and upward in a smooth arc to the maximum diameter 4.5 cm (1-3/4 in) above the base. They then curve inward to the neck, which is 6 cm (2-3/8 in) in diameter and begins 8.8 cm (3-1/2 in) above the base. From the neck the walls curve outward slightly to the rim. The rim has been shaped into a rough square with bowed sides. This reshaping affects only the rim; below that the pot is circular.

Both pots have a low center of gravity. The maximum diameter of the larger pot is only a bit larger than that of the smaller one, and they have almost the same dimensions at the top. The walls of the larger pot are drawn out over a greater distance, and it has a longer and more pronounced neck.

The decoration scheme is the same for both pots. The interiors are glazed in cream and brown. The upper parts of the walls down to the area of the neck have a dark yellowish-brown color. The interiors and the neck regions have a lustrous finish. The lower parts of the exterior walls appear first to have been covered in a cream-colored slip. A black slip was applied over this. From the direction of the lines, it appears that this black coloring was applied horizontally around the pot. Coverage by the black slip is uneven. It grows increasingly less dense toward the bottoms of the pots. The exterior of the foot ring of each shows only the cream color.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, April 2018.

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...