Showing posts with label water container. Show all posts
Showing posts with label water container. Show all posts

Wednesday, March 27, 2024

243. Bizen-ware "gold dust pouch" water container

243.  Bizen-ware water container for the tea ceremony 古備前耳付砂金袋水差  ko Bizen mimitsuki sakinbukoro mizusashi  (old[-style] Bizen-ware “gold dust pouch” water container, with ear lugs)










Roman Nikolaev, the seller, dates this to the 1950s. Here, the 古 in the inscription on the box refers not to the age of the piece but to the style of Bizen-ware. This imitates the older methods of making and firing Bizen-ware, which were revived in the twentieth century. Rather than a pottery lid (a 共蓋 tomo-buta) made of the same clay as the base, this has a black lacquered wooden lid (a 替蓋  kae-buta). 

Dark reddish brown clay, with natural-ash glazing on the exterior, with many patches of goma 胡麻, yellow sesame-seed-like deposits of ash, and some blackening of the exterior surface; the interior has no glazing. Weight: overall, 1680 g (3.75 lb); body, 1630 g (3.6 lb); lid, 50 g (1.8 oz). Height: 17.3 cm (6-7/8 in). Width: mouth, 9.8 cm (3-7/8 in); lip, 14.2 cm (5-5/8 in); narrowest, 10.3 cm (4-1/8 in); widest, 17.4 cm (6-7/8 in); base, 13.2 cm (5-1/4 in). 

This is shaped like a drawstring bag. It sits on the flat base, which is about 1 cm (3/8 in) thick. At one edge of the base, a small circle with an interior bar was incised into the clay; this may be a kiln mark. The surface of the base is lightly scored with lines, some of which continue up the sides of the piece. The walls extend upward in a convex arc, with the widest point occurring about 3.8 cm (1-1/2 in) above the base, extending to the narrowest width 10.7 cm (4-1/4 in) above the base. There is a pronounced groove encircling the pot at the narrowest width. Above this, the walls rise outward in a shallow arc to the lip. The body of the pot has horizontal striations at fairly regular intervals, perhaps remnants of finger marks if this was thrown on a wheel, or of the coils of clay if this was hand-shaped. The front of the pot has a large, irregular dent in the center, These striations are much more pronounced in the upper part of the body. Four deep vertical grooves were incised into the pot, two each on the front and the back, in the bottom section of the pot. There is another deep groove encircling the pot, at an irregular height above the base, just below the places where the bottoms of the ear lugs are attached. In contrast to most ears on Japanese pots, the widest points of the ears are at the lower end rather than the upper. The tops of the ears are 13.8 cm (5-1/2 in) and the bottoms 7.6 cm (3 in) above the base. The lid sits on a recessed gallery. The interior of the pot mirrors the shape of the exterior. The surface is relatively smooth. 

This was fired unglazed. All the surface colors and effects resulted from natural-ash glazing, ash deposits, and kiln effects. Most of the goma occur on the front of the piece. 

Like a drawstring pouch, this sags toward the base, a movement mirrored in the ear lugs, which also sag downward. “Gold dust” may be a nod to the golden goma spots. 

This came in a wooden box, inscribed in two lines, 古備前 / 耳付砂金袋水差  ko Bizen / mimitsuki  sakinbukoro mizusashi  (old[-style] Bizen-ware / “gold dust pouch” water container, with ear lugs). A paper strip pasted on the side of the box reads 備前焼 Bizenyaki  (Bizen-ware).

\Purchased from Treasures of Old Times, Perth, Australia in March 2024 (invoice, customs documents).

 

 

Saturday, November 25, 2023

235. MURAKOSHI Takuma, 1954- , natural ash-glazed water container

235. MURAKOSHI Takuma  村越琢磨, 1954- ,  shizenyū mizusashi 自然釉水指 (natural ash-glazed water container for the tea ceremony)
 










For Murakoshi, see item 234. 

Light gray clay. Kiln effect colors in reds; natural ash glazing, with white, gray, and black colors. Weight 2.3 kg (5.2 lb). Height: overall, 16.4 cm (6-1/2 in); lid, 3.2 cm (1-1/4 in); bottom part, 15.7 cm (6-1/4 in). Width: lid, 9.2 cm (3-7/8 in); rim, 11 cm (4-3/8 in); neck, 11.3 cm (4-1/2 in); widest, 18.2 cm (7-1/4 in), base, 13.3 cm (5-1/4 in). 

This sits on the edges of the base, which is slightly concave. The artist’s sigil, a long line surmounted by a short stroke (rather like a "T" with a short bar and a long tail), with two shorter lines beside the other end of the long line, has been incised into the base. The base is otherwise randomly pitted. The sides of this appear to have been formed from long strips of clay wound around the circumference. (In a description of another piece, the seller explains that this was the process used to form a large vase.) On the exterior, the seams between the strips have been shaped to form prominent ridges. On the interior the seams have for the most part been smoothed over. The body of the bottom part is a highly irregular convex curve from the rim of the base to the neck. There are many bumps and bulges in this section, and the surface is very rough and pitted. The widest part of the body occurs about 5 cm (2 in) above the base. The neck is about 12.5 cm (5 in) above the base. Above the neck, the walls flare outward at about a 70-degree angle to the rim. The outer edge of the rim is roughly 1 cm (3/8 in) wide; it is a shallow concavity and rises upward at about a 30-degree angle. The mouth drops to a narrow gallery about 1.3 cm (1/2 inch) below the upper edge of the rim. The lid is a rough circle. The upper surface is concave, with a central pillar serving as a lifting point. The surface is grooved and bumpy. The underside of the lid is convex, mirroring the general shape of the top surface. There are remnants on the underside of the three posts used to separate the lid from the shelf during firing. When properly aligned, the lid fits within the mouth. 

This was fired unglazed. The colors derive from kiln effects and natural ash glazing. The base was largely unaffected by the firing and exhibits the natural color of the clay, with some reddish coloring and vitrification on one side. The side of the pot nearest the flames has a coating of vitrified natural ash glazing, mostly in gray, with some black spots. The opposite side shows red kiln effects, but less of the natural ash glazing. On this side, toward the base, the natural clay color shows through. The exterior surface is studded with the melted white dots from the ash glazing known as shiseki 歯石 in Japanese (it translates as “tartar”). The upper side of the lid has a thick coating of gray ash glazing; the underside shows the red kiln effect colors. With the exception of the lip of the mouth and the bottom, the interior exhibits mostly the natural clay color. The mouth has some reddening and vitrification; the bottom has some blackening from soot deposits.  

This came with a wooden box inscribed by Murakoshi. The calligraphy begins on the lid and continues down one side. The column on the right reads 自然釉  (shizenyū, “natural ash glazed”); the middle column, 水指し (mizusashi, “water container”); and on the left on the front panel たくま (Takuma). Included in the box were a brown wrapping cloth and small printed biography. The artist's seals (see item no 234 for description) were stamped on the top and side of the box.

Like all of Murakoshi’s pieces, this is highly irregular and individual. 

Purchased from the Kura Monzen Gallery in Kyoto, October 2023. The Gallery hosted an exhibition of Murakoshi’s works in October-November 2023. (Invoice, customs and shipping documents)

 

Sunday, October 15, 2023

232. FURUTANI Hiromu, 1922­-2012, Shigaraki-ware water container for the tea ceremony

 232. FURUTANI Hiromu 古谷弘, Chūroku 忠六 I, 1922­-2012, Shigaraki shizenyū mentoru mizusashi 信楽自然釉面取水指  (Shigaraki-ware natural ash-glazed, faceted water container for the tea ceremony)











As evident in this piece, Furutani Hiromu was fascinated by the possibilities of koge 焦 (charring), hi-iro 火色  (flame color), and other kiln effects of Shigaraki-ware. He devoted himself to the recovery of pre-Edo firing techniques. He was on the forefront of research into ancient kiln construction and re-created both an anagama and a noborigama (climbing kiln). He was the first artist named a Dentō Kōgeishi (traditional craftsman) in Shigaraki, accepting that honor in 1976. After that his works were exhibited throughout Japan, as well as internationally. Breaking from tradition however, he also worked to create carved and modeled pieces with animated creatures writhing across the surfaces or arching to form handles. Furutani Hiromu was the father of Furutani Hirofumi 博文 (Chūroku  忠六 II) and grandfather of Furutani Taketoshi (see items nos. 218 and 224), all potters in the Shigaraki tradition. 

Light gray clay, unglazed before firing, with kiln effects in the gray and red ranges. Weight: 3.45 kg (7.7 lb). Height: overall, 22 cm (8-3/4 in); lid, 4.2 cm (1-5/8 in); bottom section, 19.3 cm (7-5/8 in). Width: lid, 11.7 cm (4-5/8 in); mouth, 16.8 cm (4-1/4 in), rim, 14.5 cm (5-3/4 in), base (maximum), 18.4 cm (7-1/4 in). 

This sits on the flat base. Remnants of the wads used during the firing to separate the piece from the kiln shelf are evident on the bottom. The characters 忠六 in a cursive script were incised into the base. The white sticker with the number 58 is from the exhibition of the works of the three Furutani generations at the Kura Monzen Gallery in Kyoto in 2023. Measurement of the depth of the interior reveals that the base is 2 cm (3/4 in) thick. The edges of the base follow the contours of the faceted walls. 

The walls were shaped by the mentoru process up to a height of 14.5 cm (5-3/4 in), where a narrow ridge of clay, hereafter the “collar,” circles the piece. Mentoru is usually translated “faceted,” but the English word seems too adjectival to me. The Japanese word is a verbal compound and implies a process of forming a face by removing or taking something away. This section has eight facets extending from the collar down to the base formed by slicing away the clay. Each section is slightly concave toward the center. The borders between the facets are sharp, bumpy ridges. The bottom of each facet between these vertical borders has been curved upward to form a curved indent, creating a series of scallops between sharp points beneath the ridges. Each facet has a series of closely spaced, shallow vertical grooves running from the collar to the scallops, perhaps made by a metal comb. The scallops were formed after these grooves were made and cover the grooves near the base. The grooves are most apparent on the side with almost no ash deposits (arbitrarily, the “back side”). The heavy ash deposits on the front side mostly obscures the grooves. Furutani dug deeper and larger grooves in an “M” pattern across the front facets. 

There are two “handles” vertically centered on the collar, on opposite sides of the piece, roughly between the front and back sides. The handles are more bumps with which one can grasp the piece rather than handles proper. They are rough wads of clay. The one on the left appears to have been damaged after the firing; it is hollow and the rough unglazed clay is exposed.

Above the collar, there is an indented section, and above this a section with horizontal grooves and rings that juts out a bit. Each of these sections occupies roughly half of the space between the collar and the rim. The lip has groove running around the circumference. The gallery on which the lid sits is recessed about 1.3 cm (1/2 in) below the lip. 

The lid has a central knob, which appears to have been shaped from a flattish piece of clay formed into a rough, open cylinder, with the top edges folded inward around an irregular opening. The top side of the lid is fairly flat, with concentric circular grooves radiating from the center. The underside of the lid is slightly convex toward the center. The lid doesn’t sit very securely on the gallery. 

The interior of the piece is an irregular cylinder, with some finger marks from the shaping. 

The surface of the piece is very rough and broken. 

What is visible of the clay body reveals that Furutani used a fine-grained clay for this. This was unglazed before firing. The front side and the top side of the lid acquired a thick layer of ash during the firing, resulting in a heavy deposit of vitrified gray glaze with some green bidoro on the grooves of the lid, the underside of the lid near the edges, and the bottom edges of the M across the front. The other side of the body became a coral red as a result of the firing; the back side also has droplets of vitrified glaze in a cream color strewn randomly over the surface. Some portions of the base and the underside of the lid and most of the interior show the unaltered clay; the interior exhibits some pink coloring on the walls and some natural ash glazing on the bottom.

This came in a wooden box, with an orange wrapping cloth and a potted biography of the artist. The lid of the box was inscribed by Furutani Taketoshi, in four lines, from right to left: 信楽 Shigaraki  /  自然釉  shizenyū (natural ash glaze) /  面取水指 mentoru mizusashi (faceted water container) / 初代 shodai (first generation) 忠六  Chūroku, followed by the artist’s seal in red (again reading 忠六  Chūroku).  The seller also included a copy of the exhibition booklet.

The results imply that Furutani sited this piece very carefully in the kiln so that the kiln effects resulted in well-delineated front and back sides.

Purchased from the Kura Monzen Gallery, Kyoto, Japan, September 2023. (Invoice, shipping and customs documents)

Monday, June 5, 2023

216. Iga-ware mizusashi

216. Iga-ware mizusashi 伊賀焼水指, a lidded fresh water container for the tea ceremony

 















Dark brown clay, with natural ash glazing in a blue-green color on the exterior and a whitish lining glaze over much of the interior. Weight: 1354 g (3 lbs). Height: 15.1 cm (6 in). Diameter: of mouth, 8.8 cm (3-1/2 in); of lid, 10.4 cm (4-1/8 in), of rim, 12.5 cm (5 in); maximum of body, 13.9 cm (5-1/2 in); of base, 11.6 cm (4-5/8 in). 

This sits on the flat base, which has several gouges from the bamboo shaping spatula. Above the base the walls move outward and upward in a straight line at about a 45-degree angle to a height of 1.7 cm (5/8 in) to the meet the walls proper of the body. The widest point of the piece occurs at this junction. The body looks almost as if it had sagged downward at this point. Above the junction the walls move inward in more or less a straight line to a height of about 3 cm (1-1/4 in). From there the walls rise roughly in a straight line to the shoulders of the piece 10 cm (4 in) above the base, where they curve outward and then inward in a convex arc to the neck, which is 10.4 cm (4-1/8 in) in diameter and located 11.4 cm (4-1/2 in) above the base. They then rise in a straight line to the rounded edge of the rim of the piece. The body of the piece is much dented, pitted, grooved. The two ear lugs are affixed at the shoulder; they are crudely fashioned, roughly circular knobs with a hole in the center. 

The lid sits on an interior gallery. The bottom of the lid is a rounded convex shape. The edge of the top surface is a flat circle; the interior of this area was hollowed out. A rectangular piece of clay was pressed into the center of the lid and folded upward to create a curved grasping point.  The lid sits securely, and all but the top of the grasping point is below the rim of the body proper. 

The surface is much pitted and rough to the touch. There are a few small pebbles embedded in the surface of the exterior walls. 

The lining glaze covers the bottom of the interior and some of the sides. It is whitish in color. The colors on the exterior range from black through dark browns to a lighter yellowish brown.  The yellowish brown color appears to have been brushed on and may result from interaction between the wood-firing and a slip or some sort of flashing glaze.  The exterior also has drips and spots of the blue-green ash glaze for which Iga-ware is known. In a few places, this glaze has vitrified and formed the turquoise spots known in Japanese as bidoro (from the Portuguese vitro ‘glass’). The underside of the lid is a sooty black. 

This came in an old wooden box. Included in the box was a white wrapping cloth. The top is inscribed 水指古伊賀焼, or “Mizusashi, Old Iga-ware.” The wood has grown so dark over time that the characters are barely visible. At a later point, someone wrote these characters on a small slip of paper and taped it to the lid.  The side of the box has an intriguing inscription.  The line on the right reads 明治三十一年十一月 (Meiji sanjūichi nen jūichi gatsu). The inscription uses a variant character for the first 十. This translates as “Thirty-first year of the Meiji era, eleventh month,” or November 1896. Japan officially adopted the Gregorian calendar in the 1870s, and I’m assuming this date reflects that.  

The middle line of the inscription was written in much larger characters and reads 吉春日.  This could have several possible translations. Literally it is “auspicious spring day,” or just “auspicious day.” The first two characters are also used as a given name read “Yoshiharu.”  The larger size relative to the other characters indicates its importance. It might be the name of the piece. Interestingly, beneath the second and third characters are the remnants of other characters, impossible to read now. 

The third line, on  the left, reads 古伊賀水指, or “old Iga mizusashi,’ The inclusion of “old” is intriguing—was  the piece already “old” when the box was made? Does the date indicate when the piece was made, or was this a gift on an auspicious occasion with the date of the gifting inscribed on the box? 

A great piece of pottery. 

Purchased from Treasures of Old Times in Bangkok, Thailand, May 2023.

 

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...