Showing posts with label Hanzawa Hiroshi. Show all posts
Showing posts with label Hanzawa Hiroshi. Show all posts

Wednesday, May 26, 2021

111. HANZAWA Hiroshi, small square Oribe plate

111. HANZAWA Hiroshi, small square Oribe plate





For Hanzawa, see item 110.

Tan clay, green and white glazes; bottom left unglazed. Weight: 228 g (8 oz). Dimension: 15.2 cm (6 in) square; base: 6.3 cm (2-1/2 in) square. Height: 2 cm (3/4 in).

The piece is irregular, and the measurements are approximate. This was formed from a squarish piece of clay roughly 16 cm (6-1/4 in) on a side and about an eighth of an inch thick. It sits on a flat base that is roughly a square. The artist’s mark was incised into the underside of the piece. The remains of the posts used to separate pieces in the kiln during firing are visible on the underside. From the base the walls rise in a low irregular convex arc to the rim. Despite the irregular shape, the plate sits solidly on the base.

With the exception of the base, the exterior surface and the area of the interior surface covered with the green glaze were coated with a rough textured slip. A four-sided area in the center of the top side was created by incising four lines into the surface. This area was coated with a cream glaze, and green glaze was dribbled over the surface to form dots and lines. The rest of the upper side was coated with the copper-heavy green glaze characteristic of Oribe-ware. Because of the rough slip, this resulted in darker areas where the glaze pooled and lighter areas where it pulled away from the texturing.  Except for a few splashes of green, the bottom was left unglazed.

Purchased from the artist, May 2021.

 

110. HANZAWA Hiroshi, plum-blossom-shaped Oribe bowl

110. HANZAWA Hiroshi, plum-blossom-shaped Oribe bowl





Hanzawa has been active as a potter since 2000. He lives in Tajimi, a center for pottery in the Seto tradition, in Gifu Prefecture, Japan. One of his specialties is pottery in the Oribe tradition. His works are available on Etsy at HiroshiPottery.

White clay, green glaze; base left unglazed. Weight: 138 g (5 oz). Rim diameter: 11 cm (4-3/8 in). Ring foot diameter 3.7 cm (1-1/2 in). Height: 5.7 cm (2-1/4 in).

The foot is ring 1 cm (3/8 in) tall on the outside and about 0.6 cm (1/4 in) deep on the interior. The artist’s mark was incised into the base. The walls rise to the rim in a convex arc. The rim has been shaped into a five-lobed plum-blossom shape. Between the lobes the walls are grooved on the exterior and protrude inward on the interior. The center of each lobe is bowed outward and curves inward to the two surrounding grooves. The walls are circular just above the base, and the outward bow becomes more prominently the higher up the wall you move.

The exterior of this appears to have been covered with a rough-textured slip. When the glaze was applied, it pulled away from the higher points on the surface, creating a mottled pattern of dark green mixed with whiter areas where the clay shows through. In a few places on the exterior, the glaze was allowed to run down into the tear shapes characteristic of Oribe. The bottom of the exterior walls and the ring foot were left unglazed. The finish is rough to the touch.

Purchased from the artist, May 2021.

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...