Showing posts with label mug. Show all posts
Showing posts with label mug. Show all posts

Saturday, January 28, 2023

198. Ralph Nuara, slipware mug

198. Ralph Nuara, slipware mug







For Nuara, see item 175.

Red clay. Slipware glazes in white and black; with clear luster glaze; base and exterior of foot ring left unglazed. Weight: 388 g (14 oz). Height: 8.3 cm (3-1/4 in). Width of rim: 10.2 x 9 cm (4 x 3-1/2 in). Diameter of base: 8 cm (3-1/8 in). Width with handle: 12.3 cm (4-7/8 in). Capacity: 396 ml (14 fl oz).

This sits on a very narrow foot ring 0.3 cm (1/8 in) wide; the interior of the ring foot has been hollowed out evenly to a depth of 0.4 cm (3/16 in). The walls above the foot ring extend upward at about a 45 degree angle to a height of 0.6 cm (1/4 in) above the base; the artist’s mark has been impressed into the clay on this strip. Above this the walls of the cup rise to the rim in a series of horizontal undulations. The cross-sections are highly irregular in shape. The walls on the side opposite the handle were flattened after throwing, and there is a large irregular dent in the middle of this side. The handle is attached at the top just below the rim and about 2 cm (3/4 in) above the base at the bottom.  The surface is very smooth.

The bottom of the inside of the mug and the irregular dent in the flat side of the walls were glazed in white. A horizontal band of black was drawn in the middle of the exterior walls apparently before the handle was attached. On the exterior, there are also splashes of black in a vertical strip near the flattened area and at the top of the handle. On the interior, there are two irregular horizontal bands of black along with vertical splashes of black along the interior walls and drips of black on the white surface of the bottom. The entire cup was covered with a clear luster glaze, with the exception of the foot ring and the slanted portion of the walls just above the foot. There are also three spots on the walls that are not covered with the luster glaze; there are apparently the spots where the mug was held by the artist’s fingertips as he dipped the mug in the glaze. Glaze was also applied over the artist’s mark.

Despite the irregularities in the shape of the rim, this is easy to drink from. It’s well-balanced and fits well in the hand.

Purchased from the artist in September 2022. 

Friday, January 27, 2023

197. Jeff Abney, mug

197. Jeff Abney (Red Gate Pottery Studio), mug “with tractor-tire texture”

 








For Abney, see item 138.

Stoneware, coarse gray clay. “Hamada” glaze showing dark red with black streaks; bottom unglazed. Weight 490 g (17.5 oz). Height: 9.2 cm (3-5/8 in). Diameter at mouth: 9.7 cm (3-7/8 in); Width with handle: 13.2 cm (5-1/4 in). Capacity: 428 ml (15 fl oz).

This sits on the flat base, which has been scored with concentric circles. The walls slope outward from the base, reaching the widest diameter 9.2 cm (3.5/8 in) about 2.5 cm (1 in) above the base and then move gradually inward to the narrowest diameter 8.8 cm (3-1/2 in) about 2 cm (3/4 in) below the rim. The walls then flare outward at a slight angle to the rim. The walls would be very irregular in cross-sections. The artist’s marks (2) have been impressed into the walls just above the base. Two horizontal rows of chevrons (the “tractor-tire texture") were impressed into the walls just above the widest diameter and at the narrowest diameter. They appear to have been made with a roller device. The top of the handle is attached over the top row of chevrons; the bottom is even with the base.  The texture is smooth except over the chevrons.

This was glazed in what Abney calls the Hamada glaze, a dark reddish brown glaze with black streaks from the wood-firing reminiscent of those used by Hamada Shōji. The base and a narrow portion of the walls just above the base were left unglazed.

The mug is heavy but easy to hold.  Simple yet effective decoration.

Purchased from the artist in September 2022.

 

Thursday, January 26, 2023

196. Anne Maraviglia, mug

196. Anne Maraviglia (Flying Plumtree Studio), wood-fired Tenmoku-glazed mug






For Maraviglia, see item 126.

Brown clay. Tenmoku glaze showing reddish brown colors; grays and blacks due to ash deposits from wood-firing; melted ash glaze on some surfaces showing as a golden sheen. The bottom was left unglazed and unexposed to the ash flow. Weight: 440 g (1 lb). Height: 10.7 cm (4-1/14 in); Diameter: 8.4 cm (3-5/16 in). Width with handle: 11.3 cm (4-1/2 in). Capacity: 426 ml (15 fl oz).

This sits on the flat base; the sides of the base are beveled at about a 45 degree angle up toward the walls of the cup. There is a slight groove just above this bevel. The glazing extends down to the groove. There are two horizontal bulges roughly 40 and 60 percent of the way up the cup. The handle is attached just above the bottom rim and just above the uppermost bulge. The artist’s mark was impressed into the clay just above the groove and next to the handle.

This was wood-fired. One side of the cup shows a large patch of black and gray ash deposits. The opposite side shows less impact from the wood-firing. Melted ash glazing left a gold-hued sheen over much of the exterior surface. The rim is black and gray on the exterior. The interior is a dark reddish brown. The surface of this is smooth.

The mug is well balanced. The lower placement of the handle makes it easier to hold even when the mug is full despite the depth of the cup.

Purchased from the artist in September 2022.

 

Friday, March 11, 2022

167. Andrew Mazzaschi, mug

 167. Andrew Mazzaschi, mug







For Mazzaschi, see item 103.

Dark chocolate clay, white glaze, base left unglazed. Weight: 345 g (12 oz). Width of rim: 9.2 cm (3-1/2 in); of base: 6.3 cm (2-1/4 in). Maximum width of body: 9.4 cm (3-5/8 in). Width with handle: 11.7 cm (4-5/8 in). Minimum width: 7.7 cm (3 in). Capacity: 500 ml (2 cups).

This sits directly on the flat base. The artist’s mark, a square with his initials AHSM, was stamped into the base. Above the base, the walls rise outward at a 45-degree angle to reach the maximum width 2.5 cm (1 in) above the base. From there the walls curve inward and then outward to the rim in a concave arc. The minimum width lies 7 cm (2-3/4 in) above the base. This section of the walls was divided into six panels by vertical diagonal ridges sloping from top to bottom and left to right. The handle was attached just below the rim and just above the break at the maximum width.

The base and a small portion of the walls just above the base were left unglazed. The white glaze pulled away from the stress points allowing the color of the clay to show through and forming brown specks and streaks.

This is a comfortable cup to hold. Chipped on rim.

Purchased at Feet of Clay, semiannual pottery sale, December 2021.

 

Thursday, March 10, 2022

166. Andrew Mazzaschi, mug

 166. Andrew Mazzaschi, mug 







For Mazzaschi, see item 103.

Dark chocolate brown clay, glazed with brown slip underglaze and a white overglaze; base and bottom of outside wall left unglazed. Weight: 420 g (15 oz). Diameter of rim: 8.2 cm (3-1/4 in); of base 4.8 cm (1-7/8 in); of bottom bulge: 8.8 cm (3-1/2 in). Width with handle: 11.7 cm (4-5/8 in). Height: 10.3 cm (4-1/8 in). The capacity is 450 ml (1-3/4 cup).

This sits on the flat base. The artist’s mark, a square with his initials AHSM inside, was pressed into the base. The walls bulge out to the widest width of the body 3 cm (1-3/8 in) above the base and then curve inward to the waist 6.4 cm (2-1/2 in) above the base; the waist is 7 cm (2-3/4 in) in diameter. From the waist, the walls slope outward to the rim. The exterior of the body was shaped into eight vertical panels running the length of the body. Diagonal grooves running left to right and from top to bottom were carved into the exterior of the body. The ear-shaped handle was attached just below the rim and just below the widest point of the bottom bulge. The interior mirrors the general shape of the body, but without the panels and grooves. The surface of the glazed portion of the mug is smooth but broken by the ridges at the sides of the panels and grooves.

This was first coated with a brown slip and then with a white glaze. The white glaze pooled in the grooves but pulled away from the stress points at the rim and along the edges of the grooves. At one point there is a blue strip running the length of two of the grooves. The brown slip shows through more on the interior, which has band of whitish glaze at the top with a few drips running down into the mug.

This is one of Mazzaschi’s standard patterns--not the best shape in my opinion. The mug is a bit bottom heavy when full. The weight of the liquid pulls it away from the handle. Also, the final couple of tablespoons of liquid pool in the bulge at the bottom and can rush out when the mug is tilted back to get the last bits.

Purchased at Feet of Clay annual winter sale in December 2021.

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...