Showing posts with label Feet of Clay Pottery. Show all posts
Showing posts with label Feet of Clay Pottery. Show all posts

Tuesday, May 3, 2022

190. Caitlyn Kent, small pit-fired vase

190. Caitlyn Kent, small pit-fired vase









Kent is a Boston-area potter. For other examples of her work, see her Instagram account, @caitlynkentpottery.

White clay, colors from pit-firing. Weight: 216 g (7 oz). Diameters: maximum, 7.6 cm (3 in); of rim, 3.3 cm (1-5/16 in); of base, 5.4 cm (2-1/4 in). Height: 8.2 cm (3-1/4 in).

This sits on the flat base. The letters “NFS” were incised into the base. also incised into the base is an indecipherable squiggle. The walls rise in a shallow convex arc to the shoulders about 5.7 cm (2-1/4 in) above the base. The maximum width is about 0.7 cm (1-4 in) below this. The walls then slope inward to the neck, which begins 7.6 cm (3 in) above the base and is 3.2 cm (1-1/4 in) in diameter. Above the neck, the walls slant slightly outward to the rim. The letters “VIII” (Roman numeral 8?) have been incised into the side of the walls just above the base. The surface of this is smooth with the exception of a few small bumps from the pit-firing.

When I purchased this, Kent told me this was pit-fired in a backyard barbecue loaded with a pile of wood.  A banana peel was wrapped around the pot, which was then enclosed in an aluminum-foil saggar. The colors range from light and dark grays, through browns and reds.

A nice exploitation of the potentials of pit-firing.

Purchased at Feet of Clay’s annual spring show, 2022.

 

Tuesday, May 25, 2021

Feet of Clay Pottery

Feet of Clay Pottery

Many of the pots described here were purchased at Feet of Clay Pottery in Brookline, Massachusetts. Feet of Clay is an artists’ cooperative that provides equipment, supplies, and workspace for its members. It holds special seminars for its members as well as classes for beginning students. Twice a year, in April/May and December, it hosts sales of members’ and students’ work. For more information, see www.feetofclaypottery.com.

 

 

107. Andrew H.S. Mazzaschi, lidded jar

107. Andrew H.S. Mazzaschi, lidded jar

 
 
 

For Mazzaschi, see item 103.

Reddish-brown clay, blue and white glazes; base and those portions of the lid and the gallery on which the lid rests were left unglazed. Weight: 540 g (1.2 lb). Bottom section. Rim diameter: 6.7 cm (2-5/8 in); maximum diameter: 8.8 cm (3-1/2 in); base diameter: 6.8 cm (2-3/4 in). Height: 12.5 cm (5 in).  Lid. Rim diameter: 5.3 cm (2-1/8 in). Height: 3.3 cm (1-3/8 in).  Overall height of jar: 16 cm (6-3/8 in).

This sits directly on the base. The artist’s mark, his initials, AHSM, inside a square, was stamped inside this area. Above the base, the walls move in a continuous convex arc to the break at the shoulders, 9.3 cm (3-3/4 in) from the base. The maximum diameter of 8.8 cm (3-1/2 in) lies 5.3 cm (2-1/8 in) above the base; The diameter at the shoulders is 8.2 cm (3-1/4 in). From the shoulders the walls angle upward and inward in more or less a straight line to the neck, which has a diameter of 4.3 cm (1-3/4 in) and lies 11 cm (4-3/8 in) above the base. From the neck the walls angle outward and upward in a straight line to the rim. A downward slanting gallery was created inside the rim to serve as a rest for the lid. The underside of the lid is concave. The upper side rises in a convex arc to the central post, which supports a cone-shaped knob. The lid fits snuggly into the bottom section.

The body of the pot between the base and the shoulders was shaped into an octagon with outward bulging sides and decorated with patterns of slanting grooves to form nested diamond shapes. The artist gives this explanation of the process: the jar “was thrown on the wheel as a cylinder, faceted with a wiggle wire, then stretched from the inside. Then the neck and gallery were thrown and the little lid was thrown separately and the knob carved out of excess clay attached to the lid.”

The inside of the pot and the underside of the lid were glazed in cream. A thin blue glaze was applied to the outside; the glaze pooled in crevices and pulled away from edges, accentuating the facets in the diamond pattern. The color of the clay shows through in many places, giving the surface a mottled appearance. The base and the areas of the lid and the gallery inside the rim were left unglazed.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, May 2021.

 

106. Andrew H.S. Mazzaschi, albarello-shaped jar

106. Andrew H.S. Mazzaschi, albarello-shaped jar

 

 

 

 



 

 

For Mazzaschi, see item 103.

White stoneware clay, pale green/dark red glaze; base left unglazed. Weight: 680 g (1.5 lb). Rim diameter: 5.6 cm (2-3/16 in); maximum diameter: 9.3 cm (3-5/8 in); foot ring diameter: 5.4 cm (2-1/8 in). Height: 15.7 cm (6-1/4 in).

The shape was inspired by the albarello. Albarelli date from the fifteenth century and were traditionally made of majolica. They were used by apothecaries for dry-goods storage and had a parchment or leather lid.

This sits on the base of the foot ring. Both on the inside and the outside, the foot is about 0,6 cm (1/4 in) high. The artist’s mark, his initials, AHSM, inside a square, was stamped inside this area. Above the foot ring, the walls quickly rise in a convex arc to the maximum diameter of 9.3 cm (3-5/8 in) at the first break 3.5 cm (1-3/8 in) above the base. From there the walls move in a concave arc to the next break at the shoulders, 11 cm (4-7/8 in) above the base. The diameter at the shoulders is 8.8 cm (3-1/2 in). Within this concave area, the narrowest diameter is 8.2 cm (3-1/4 in); it lies 7.8 cm (3-1/8 in) from the base, roughly at the midpoint of the pot. From the shoulders the walls slant inward at a straight angle to the neck, 13.8 cm (5-1/2 in) above the base. The diameter at the bottom the neck is 6 cm (2-3/8 in). The walls of the neck slant slightly inward in a straight line as they rise to the rim. The finish on the pot is smooth.

This was glazed in a copper-containing glaze that is pale green where thinly applied but self-reduces where thick, turning a dark scarlet. The interior of the pot is white. The foot was left unglazed.

The pot has a nice heft, and the concave arc in the middle makes it easy to hold, perhaps a consideration in the designing of a small jar that would be handled frequently and possibly stored on a high shelf. If several albarelli were stored side by side, the concavity would give room for fingers to slide between the jars to pick one up; straight abutting sides would make it more difficult to pull one jar out. If so, the shape represents a nice adaptation of form to function.

An intriguing shape, with its combination of convex and concave arcs and straight lines, made even more eye-catching by the random pattern of green and red colors.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, May 2021.

 

Monday, May 24, 2021

104. Andrew H.S. Mazzaschi, soda-fired tumbler

104. Andrew H.S. Mazzaschi, soda-fired tumbler

 


 

 

For Mazzaschi, see item 103.

Brown stoneware clay, seafoam glaze; base left unglazed. Weight: 384 g (14 oz). Rim and maximum diameter: 8.2 cm (3-1/4 in); foot ring diameter: 4.7 cm (1-7/8 in). Height: 12 cm (4-3/4 in).

This sits on the base of the foot ring. On both the interior and the exterior the foot ring is about 0.6 cm (1/4 in) high. On the exterior, the foot ring has been shaped into a concave arc. The artist’s mark, his initials, AHSM, inside a square, has been stamped inside the foot ring. Above the foot, the walls arc out quickly, reaching the maximum diameter about 2.5 cm (1 in) above the base. From there the walls rise more or less in a straight line to the rim, with one exception. There is a concave indentation running around the pot above 5 cm (2 in) above the base. The exterior has a series of raised vertical lines running down the outside. These lines are irregularly spaced, and in places the edges protrude sharply through the finish.

The piece was decorated with a textured dark red slip, and a seafoam glaze was applied inside and out. The piece was then soda-fired. The firing produced the variations in color from glossy and pale blue to eggshell, with grays, green, and browns. The surface is speckled with many dark brown spots. The red of the slip shows through on the higher and sharper vertical lines, as well as on the foot ring. The color of the clay is visible only in the marks on the foot ring left by the wads used to separate pots during firing.

The shape of this reminds me of a Japanese yunomi (handle-less teacup). It’s well balanced and comfortable to hold. The range of colors is fantastic. The irregular lines add movement and a unique texture.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, May 2021.

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...