Showing posts with label miniature pot. Show all posts
Showing posts with label miniature pot. Show all posts

Thursday, May 20, 2021

76. Erica Kirsners, miniature pot

76. Erica Kirsners, miniature pot





Kirsners is a Boston-area potter. For other examples of her work, see her page at www.feetofclaypottery.com.

White clay, green glaze, base left unglazed. Weight: 198 g (7 oz). Rim width: 7.3–7.6 cm (2-7/8 – 3 in); base width: 3.2 cm (1-1/4 in). Height: 5.7–6.2 cm (2-1/4 – 2-5/8 in).

Potting doesn’t get any simpler than this. Take a ball of clay, insert your thumbs back to back, push them into the center of the ball, and form the walls between your thumbs and fingers. Press the resulting piece onto a work surface to flatten the base. Let dry, glaze it, and stick it in the kiln. This piece is an irregular oval of varying heights. The surface is bumpy. The artists’ initials, “EK,” and “17” are incised into the base. Presumably this means the piece was made in 2017.

A light green glaze was applied to the interior and the exterior with the exception of the base.

The piece is rough and crude. It probably was the work of a couple of minutes. It has given me many hours of pleasure.

Purchased at the annual winter sale at Feet of Clay Pottery, Brookline, Massachusetts, December 2018.

 

Wednesday, May 19, 2021

71. Kevin Viens, miniature pot

71. Kevin Viens, miniature pot

 

 

 

For Viens, see item 69.

Off-white clay, green and black glazes; base left unglazed. Weight: 172 g (6 oz). Rim and maximum diameters: 6.3 cm (2-1/2 in); base diameter: 3.7 cm (1-1/2 in). Height: 7 cm (3 in).

This sits directly on the base. The interior of the base has been hollowed out to a depth of about 03. cm (1/8 in). “VIENS” is lightly incised into the base.  From the base the walls arc in a convex shape, reaching the widest diameter of 3.2 cm (1-1/4 in) above the base and ending about 5 cm (2 in) above the base. Just below the end of this convex arc, a groove was incised around the circumference of the pot. Above the arc, the walls rise in more or less a straight line to the neck, which is 5 cm (2 in) wide and 6 cm (2-3/8 in) above the vase. From the neck the walls curve outward in a concave arc to the rim.

The base and a bit of the exterior wall above the base was left unglazed. Up to the neck, the exterior of the pot is covered with a light green glaze. The interior and the neck of the exterior were glazed in black.

Purchased at the annual spring sale at Feet of Clay Pottery, Brookline, Massachusetts, April 2019.

70. Kevin Viens, miniature pot

70. Kevin Viens, miniature pot

 



For Viens, see item 69.

Off-white clay, black, blue/red glazes; base left unglazed. Weight: 188 g (6.5 oz). Rim diameter: 4.7 cm (1-7/8 in); maximum diameter: 6 cm (2-3/8 in); base diameter: 3.5 cm (1-3/8 in). Height: 7.5 cm (3 in).

This sits on the base, which has been hollowed out to a depth of 0.3 cm (1/8 in). “VIENS” was incised shallowly into the base. From the base the walls rise outward to the maximum diameter 3.7 cm (1-1/2 in) above the base. They then slant inward in more or less a straight line to the neck, which is 4.5 cm (1-3/4 in) in diameter and 7 cm (2-3/4 in) above the base. There is a groove around the circumference 5 cm (2 in) above the base. About 1.3 cm (1/2 in) above this, there is a slight bulge outward in the walls. From the neck the walls rise at a steep angle to the rim.

The base and a bit of the exterior walls above the base were left unglazed. Up to the neck a glaze that sometimes shows as blue and sometimes as red depending on the temperature and air currents in the kiln was applied. Because of the nature of the blue/red glaze, the exterior is a mix of colors. The neck and the interior of the pot were glazed in black.

Purchased at the annual winter sale at Feet of Clay Pottery, Brookline, Massachusetts, December 2018.

 

69. Kevin Viens, miniature pot

69. Kevin Viens, miniature pot

 



Viens is a Boston-area potter. I’ve not been able to find out much about him. His pieces feature excellent shapes and a strong sense of design. The interiors of all the pots shown here were glazed in black, which seems to be a preference of his. For more examples of his work, see his page at www.feetofclaypottery.com and his website, www.kevinviensceramics.com.

Off-white clay, black glaze, red and tan slips; base left unglazed. Weight: 186 g (6.5 oz). Rim diameter: 6 cm (2-3/8 in); maximum diameter: 7 cm (2-3/4 in); base diameter: 3.7 cm (1-1/2 in). Height: 6 cm (2-3/8 in).

This sits directly on the base, which has been hollowed out to a very shallow depth. “VIENS” was incised into the base. From the base, the walls rise outward in more or less a straight line to the maximum diameter 3.7 cm (1-1/2 in) above the base. There the walls break and slant inward at a shallow angle before rising briefly to another break 4.7 cm (1-7/8 in) from the base. There is a narrow shoulder at this point, and from there the walls slant inward to the neck, which is 4.7 cm (1-7/8 in) wide and 5.7 cm (2-1/4 in) above the base. From there the walls arc upward and outward to the underside of the rim.

The base and a bit of the exterior above the base were left unglazed. A red slip was applied to the rest of the exterior. This was covered with a tan slip. The red shows through the tan just above the base and at the breaks in the exterior wall, creating narrow red circles around the circumference of the pot at these points. The red also shows through at random places. The neck and interior of the pot were covered with a thick black glaze.

For such a small object, this has a complicated shape, which the decoration outlines and emphasizes.

 Purchased at the annual winter sale Feet of Clay Pottery, Brookline, Massachusetts, December 2018.

 

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...