Showing posts with label Dawson. Show all posts
Showing posts with label Dawson. Show all posts

Saturday, May 8, 2021

31. Dawson, small pot

31.  Dawson, small pot







I do not know Dawson’s given name. Since I bought this at Peninsula Potters, which is a female potters' group, she was a woman.

Grayish-white clay, green, brown, and clear glazes; foot left unglazed. Weight: 382 g (14 oz). Rim diameter: 8.7 cm (3-1/2 in); maximum diameter: 10 cm (4 in); base diameter: 4 cm (1-1/2 in). Height: 9.3 cm (3-5/8 in).

This sits directly on the base. The area within the base was hollowed out. Within this area, the artist incised her surname and stamped a small butterfly. From the base the walls angle upward sharply to the maximum diameter at about a height of 5.7 cm (2-1/4 in). The walls then curve inward to the neck; this section is about 2 cm (3/4 in) high. Above this, the neck (1.3 cm [1/2 in] high) angles outward slightly.

On the exterior walls of the pot, broad green lines angle to the left until they meet the shoulder and then turn to the right and curve downward to the base. Between each pair of green lines are thinner brown lines. Vertically the brown lines have roughly the same shape as the green lines. Thinner, randomly placed, wavier brown lines extend from the vertical brown lines to the left to meet the next green line. The rim of the pot was also covered in green. A clear glaze was then applied to the interior, the walls, and the hollowed-out area within the base, leaving only the foot of the pot unglazed.

This decoration scheme both highlights the shape of the pot and breaks it up. The angled vertical lines emphasize the change in direction in the silhouette of the piece at the shoulder, but their irregularity in spacing and shape add motion to what would be a static object if glazed in monochrome. The result is a piece with spontaneity and verve.

 Purchased at Peninsula Potters in Pacific Grove, California, in the early 1990s.

30. Dawson(?), shallow bowl with indented edge

30. Dawson(?), shallow bowl with indented edge

 




I attribute this to Dawson because it has the same butterfly mark on the bottom as item 31 and because I bought it at the same place and time. This was a second. There are three small spots on the interior not covered by the glaze.

White clay, grayish-green and brown glazes, base is unglazed. Weight: 632 g (1.4 lb). Rim diameter (also maximum diameter) 20 cm (8 in); outer foot ring diameter: 14.5 cm (5-3/4 in). Height: 5 cm (2 in).

This has two foot rings. The outer ring has a wide diameter in relation to the rest of the pot.  The inner foot ring is 6.5 cm (2-3/4 in) in diameter. Both are less than 0.2 cm (1/16 in) high on both the outside and the inside. The large area within the rim was left unglazed. The walls rise at a steep angle to the rim. At the rim, the pot was pushed in at three places, perhaps using a thumb. The inside bottom of the bowl is roughly the same size as the base of the pot.

The walls were covered with a light grayish-green glaze. It ran down the outside in irregular blotches, leaving some areas unglazed. The interior bottom was covered irregularly with a brown glaze; some lines were drawn with this glaze. The interior and exterior walls were covered with a transparent glaze; this glaze was so thick on the bottom of the pot that the bottom has a glassy look.

Denting the rim of the pot was a simle way to make it interesting. Sometimes it takes very little to create something unique. It’s a pity about the breaks in the glazing, but that unpredictability also makes pots interesting.

Purchased at Peninsula Potters in Pacific Grove, California, in the early 1990s.

Pottery

Looking for suggestions

I need to dispose of my collection. I've tried to donate it to several local museums or schools with ceramics programs, but no one wants...